Publications

Book/Monograph

Gadelmeier, Christian
Mechanische Eigenschaften von einkristallinen kubisch-flächenzentrierten Hochentropielegie ...
Düren : Shaker, 2023. - 132 pp.
doi:10.2370/9783844090017 ...

Wallmann, Clemens; Laukant, Holger; Glatzel, Uwe
Thermisches Fügen für die stahlintensive Hybridbauweise im Fahrzeugleichtbau : (AVIF A 185 ...
Frankfurt : Verband der Automobilindustrie, 2006 . - (FAT-Schriftenreihe; 200)

Thüringer Werkstofftag 2002
publ: Schnapp, Jürgen Dieter; Glatzel, Uwe; Jandt, Klaus D.; Knake, Harald
Berlin : Köster, 2002

Glatzel, Uwe
Microstructure and Internal Strains of Undeformed and Creep Deformed Samples of a Nickel- ...
Berlin : Köster, 1994. - 80 pp.

Glatzel, Uwe
Untersuchung zur Hochtemperaturbelastung einkristalliner Nickelbasislegierungen mit hohem ...
Berlin : Technische Universität, 1990. - 105 pp.

Complete issue of a journal

11th International Conference of Creep and Fracture of Engineering Materials and Structure ...
publ: Glatzel, Uwe; Eggeler, G.; Kostorz, G.
Materials Science and Engineering: A vol. 510-511 (2009)

Article in a journal (peer-reviewed)

Vogler, Jonas; Schneiderman, Benjamin; Yu, Zhenzhen; Huber, Jakob; Völkl, Rainer; Glatzel, Uwe
Compositionally Complex Alloy MnFeCoNiCu for Brazing Nickel-Based Superalloy Haynes 214
in Advanced Engineering Materials vol. 26 (2024) issue 14
doi:10.1002/adem.202400747 ...

Ulrich, Anke Silvia; Kasatikov, Sergey; König, Till; Fantin, Andrea; Margraf, Johannes T.; Galetz, Mathias
Decreased Metal Dusting Resistance of Ni-Cu Alloys by Fe and Mn Additions
in High Temperature Corrosion of Materials (2024)
doi:10.1007/s11085-024-10263-w ...

Vogler, Jonas; Völkl, Rainer; Song, Jieun; Viebranz, Vincent Fabian; Huber, Jakob; Bauer, Hans-Jörg; Werner, Ewald; Glatzel, Uwe
High temperature and high strain rate properties of brazed honeycomb liner material Haynes ...
in Wear vol. 550-551 (2024)
doi:10.1016/j.wear.2024.205427 ...

Öztürk, Beyza; White, Emma; Dickes, Daniel; Glatzel, Uwe; Mengis, Lukas; Galetz, Mathias
Improved tribological behavior of Ti-6Al-4V through a novel zirconium diffusion coating
in Surface and Coatings Technology vol. 487 (2024)
doi:10.1016/j.surfcoat.2024.130993 ...

Dickes, Daniel; Zhao, Yujun; Baier, Felix; Öztürk, Beyza; Völkl, Rainer; Li, Tong; Galetz, Mathias C.; Glatzel, Uwe
Influence of oxygen ingress on microstructure and phase formation during two-step oxidatio ...
in Applied Physics Letters vol. 124 (2024) issue 7
doi:10.1063/5.0190771 ...

Öztürk, Beyza; Rudolphi, Mario; White, Emma; Dickes, Daniel; Glatzel, Uwe; Galetz, Mathias
Influence of Water Vapor on the Oxidation of Pure Titanium
in High Temperature Corrosion of Materials (2024)
doi:10.1007/s11085-024-10288-1 ...

Rosenkranz, Laura; Lan, Qianqian; Heczko, Milan; Egan, Ashton J.; Mills, Michael J.; Feuerbacher, Michael; Glatzel, Uwe
Microstructure evolution and twinning-induced plasticity (TWIP) in hcp rare-earth high-and ...
in Journal of Applied Physics vol. 136 (2024) issue 2
doi:10.1063/5.0207181 ...

Huber, Jakob; Vogler, Jonas; Torgersen, Jan; Werner, Ewald
Predicting mechanical failure of polycrystalline dual-phase nickel-based alloys by numeric ...
in Continuum Mechanics and Thermodynamics vol. 36 (2024) . - pp. 775-793
doi:10.1007/s00161-024-01298-0 ...

Müller, Moritz; Böttger, Bernd; Schleifer, Felix; Fleck, Michael; Glatzel, Uwe
3D Minimum Channel Width Distribution in a Ni Base Superalloy
in Integrating Materials and Manufacturing Innovation vol. 12 (2023) . - pp. 27-40
doi:10.1007/s40192-022-00290-3 ...

Yesilcicek, Y.; Haas, Sebastian; Suárez Ocaño, P.; Zaiser, E.; Hesse, R.; Többens, D. M.; Glatzel, Uwe; Manzoni, Anna M.
Controlling Lattice Misfit and Creep Rate Through the γ' Cube Shapes in the Al₁₀Co₂₅Cr₈Fe₁ ...
in High Entropy Alloys & Materials vol. 1 (2023) . - pp. 134-142
doi:10.1007/s44210-022-00009-1 ...

Beck, Katharina; Hinrichs, Frauke; Oskay, Ceyhun; Ulrich, Anke Silvia; Heilmaier, Martin; Galetz, Mathias C.
Chromium Diffusion Coatings for Mo-Based Silicides to Improve Their Oxidation Resistance
in Coatings vol. 13 (2023) issue 10
doi:10.3390/coatings13101712 ...

Ulrich, Anke Silvia; Schlereth, Clara; Grégoire, Benjamin; Sutter, Florian; Oskay, Ceyhun; Hildebrandt, Christina; Galetz, Mathias Christian
Cr–Mn-diffusion coatings on VM12: In situ spinel formation with high solar absorptance for ...
in Solar Energy Materials and Solar Cells vol. 257 (2023)
doi:10.1016/j.solmat.2023.112382 ...

Schleifer, Felix; Lin, Yueh-Yu; Glatzel, Uwe; Fleck, Michael
The Elastic Effect of Evolving Precipitate Shapes on the Ripening Kinetics of Tetragonal P ...
in Metallurgical and Materials Transactions A vol. 54 (2023) issue 5. - pp. 1843-1856
doi:10.15495/EPub_UBT_00007035 ...

Ulrich, Anke Silvia
Metal Dusting : Aggressive Hochtemperaturkorrosion bei regenerativen Energien
in Galvanotechnik vol. 114 (2023) issue 6. - pp. 683-688
https://www.leuze-verlag.de/shop/einzelartikel-gal ...

Huber, Jakob; Vogler, Jonas; Werner, Ewald
Multiscale modeling of the mechanical behavior of brazed Ni-based superalloy sheet metals
in Continuum Mechanics and Thermodynamics vol. 35 (2023) . - pp. 211-229
doi:10.1007/s00161-022-01172-x ...

Petry, Nils-Christian; Bik, Maciej; Wilk, Łukasz; Swadźba, Radosław; Ulrich, Anke Silvia; Sitarz, Maciej; Lepple, Maren; Galetz, Mathias Christian
Polymer-derived SiAlOC coating to improve the high-temperature resistance of chromium
in Surface and Coatings Technology vol. 474 (2023)
doi:10.1016/j.surfcoat.2023.130049 ...

Fleck, Michael; Schleifer, Felix
Sharp phase-field modeling of isotropic solidification with a super efficient spatial reso ...
in Engineering with Computers vol. 39 (2023) issue 3. - pp. 1699-1709
doi:10.15495/EPub_UBT_00007008 ...

Chen, Dehua; Daoud, Haneen; Dörflinger, Thomas; Näser, Peter; Smuda, Ute; Herlan, Jürgen; Glatzel, Uwe
Simulation assisted design and manufacturing of anode for the hard chrome plating of compo ...
in Surface and Coatings Technology vol. 455 (2023)
doi:10.1016/j.surfcoat.2022.129178 ...

Dickes, Daniel; Öztürk, Beyza; Baier, Felix; Berger, Pascal; George, Easo P.; Völkl, Rainer; Galetz, Mathias C.; Glatzel, Uwe
Surface hardening of TiZrNbHfTa high entropy alloy via oxidation
in Corrosion Science vol. 217 (2023)
doi:10.1016/j.corsci.2023.111159 ...

Rosenkranz, Laura; Feuerbacher, Michael; Gadelmeier, Christian; Schleifer, Felix; Glatzel, Uwe
Tensile behavior of hexagonal rare-earth-based low, medium, and high entropy alloys : Stre ...
in Intermetallics vol. 155 (2023)
doi:10.1016/j.intermet.2023.107835 ...

Körber, Selina; Fleck, Michael; Völkl, Rainer; Glatzel, Uwe
Anisotropic Growth of the Primary Dendrite Arms in a Single-Crystal Thin-Walled Nickel-Bas ...
in Advanced Engineering Materials vol. 24 (2022) issue 6
doi:10.1002/adem.202101332 ...

Schleifer, Felix; Müller, Moritz; Lin, Yueh-Yu; Holzinger, Markus; Glatzel, Uwe; Fleck, Michael
Consistent Quantification of Precipitate Shapes and Sizes in Two and Three Dimensions Usin ...
in Integrating Materials and Manufacturing Innovation vol. 11 (2022) issue 2. - pp. 159-171
doi:10.1007/s40192-022-00259-2 ...

Redka, David; Winter, Jan; Gadelmeier, Christian; Djuranovic, Alexander; Glatzel, Uwe; Minár, Ján; Huber, Heinz Paul
Control of ultrafast laser ablation efficiency by stress confinement due to strong electro ...
in Applied Surface Science vol. 594 (2022)
doi:10.1016/j.apsusc.2022.153427 ...

Gadelmeier, Christian; Yang, Ying; Glatzel, Uwe; George, Easo P.
Creep strength of refractory high-entropy alloy TiZrHfNbTa and comparison with Ni-base sup ...
in Cell Reports Physical Science vol. 3 (2022) issue 8
doi:10.1016/j.xcrp.2022.100991 ...

Körber, Selina; Wolff-Goodrich, Silas; Völkl, Rainer; Glatzel, Uwe
Effect of Wall Thickness and Surface Conditions on Creep Behavior of a Single-Crystal Ni-B ...
in Metals vol. 12 (2022) issue 7
doi:10.3390/met12071081 ...

Lo, Kai-Chi; Murakami, Hideyuki; Glatzel, Uwe; Yeh, Jien-Wei; Gorsse, Stéphane; Yeh, An-Chou
Elemental effects on the oxidation of refractory compositionally complex alloys
in International Journal of Refractory Metals and Hard Materials vol. 108 (2022)
doi:10.1016/j.ijrmhm.2022.105918 ...

Dickes, Daniel; Öztürk, Beyza; Völkl, Rainer; Galetz, Mathias; Glatzel, Uwe
Improving the Adhesion of a Hard Oxide Layer on Ti6Al4V by a Three-Step Thermal Oxidation ...
in Advanced Engineering Materials vol. 24 (2022) issue 3
doi:10.1002/adem.202100864 ...

Hilzenthaler, Marius; Scherm, Florian; Daoud, Haneen; Glatzel, Uwe
In-situ decarburization and deoxidation during laser powder bed fusion of water-atomized s ...
in Powder Technology vol. 412 (2022)
doi:10.1016/j.powtec.2022.117973 ...

Öztürk, Beyza; Mengis, L.; Dickes, Daniel; Glatzel, Uwe; Galetz, Mathias
Influence of Water Vapor and Temperature on the Oxide Scale Growth and Alpha-Case Formatio ...
in Oxidation of Metals vol. 97 (2022) . - pp. 241-260
doi:10.1007/s11085-021-10088-x ...

Feng, Bo; Fetzer, Ann-Katrin; Ulrich, Anke Silvia; Galetz, Mathias C.; Kleebe, Hans-Joachim; Ionescu, Emanuel
Monolithic ZrB₂‐based UHTCs using polymer‐derived Si(Zr,B)CN as sintering aid
in Journal of the American Ceramic Society vol. 105 (2022) issue 1. - pp. 99-110
doi:10.1111/jace.18038 ...

Hinrichs, Frauke; Kauffmann, Alexander; Tirunilai, Aditya Srinivasan; Schliephake, Daniel; Beichert, Bonita; Winkens, Georg; Beck, Katharina; Ulrich, Anke Silvia; Galetz, Mathias C.; Long, Zhongmin; Thota, Hemanth; Eggeler, Yolita; Pundt, Astrid; Heilmaier, Martin
A novel nitridation- and pesting-resistant Cr-Si-Mo alloy
in Corrosion Science vol. 207 (2022)
doi:10.1016/j.corsci.2022.110566 ...

Petry, Nils-Christian; Ulrich, Anke Silvia; Feng, Bo; Ionescu, Emanuel; Galetz, Mathias C.; Lepple, Maren
Oxidation resistance of ZrB₂‐based monoliths using polymer‐derived Si(Zr,B)CN as sintering ...
in Journal of the American Ceramic Society vol. 105 (2022) issue 8. - pp. 5380-5394
doi:10.1111/jace.18473 ...

Mosbacher, Mike; Hilzenthaler, Marius; Galetz, Mathias; Glatzel, Uwe
Oxygen Diffusion Hardened Zirconium Alloy ZrNb7 : Tribological Properties Derived from Cal ...
in Tribology International vol. 165 (2022)
doi:10.1016/j.triboint.2021.107304 ...

Ulrich, Anke Silvia; Knowles, Alexander J.; Cantatore, Valentina; Bhowmik, Ayan; Wharmby, Michael T.; Geers, Christine; Panas, Itai; Galetz, Mathias C.
Pt accelerated coarsening of A15 precipitates in Cr-Si alloys
in Materials & Design vol. 218 (2022)
doi:10.1016/j.matdes.2022.110655 ...

Galetz, Mathias C.; Ulrich, Anke Silvia; Hasemann, G.; Krüger, M.
Refractory Metal-Based High Entropy Silicide-Borides: The Future of Materials Beyond MoSiB ...
in Intermetallics vol. 148 (2022)
doi:10.1016/j.intermet.2022.107620 ...

Lee, Chi-Hung; Chin, Hsu-Hsuan; Zeng, Kun-Yuan; Chang, Yao-Jen; Yeh, An-Chou; Yeh, Jien-Wei; Lin, Su-Jien; Wang, Chun-Chieh; Glatzel, Uwe; Huang, E-Wen
Tailoring Ferrimagnetic Transition Temperatures, Coercivity Fields, and Saturation Magneti ...
in Frontiers in Materials vol. 9 (2022)
doi:10.3389/fmats.2022.824285 ...

Liu, Che-Jen; Gadelmeier, Christian; Lu, Shao-Lun; Yeh, Jien-Wei; Yen, Hung-Wei; Gorsse, Stéphane; Glatzel, Uwe; Yeh, An-Chou
Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperature ...
in Acta Materialia vol. 237 (2022)
doi:10.1016/j.actamat.2022.118188 ...

Inui, Haruyuki; Kishida, Kyosuke; Li, Le; Manzoni, Anna M.; Haas, Sebastian; Glatzel, Uwe
Uniaxial Mechanical Properties of Face-Centered Cubic Single- and Multiphase High-Entropy ...
in MRS Bulletin vol. 47 (2022) issue 2. - pp. 168-174
doi:10.1557/s43577-022-00280-y ...

Zhang, Jingfeng; Gadelmeier, Christian; Sen, Sandipan; Wang, Rui; Zhang, Xi; Zhong, Yu; Glatzel, Uwe; Grabowski, Blazej; Wilde, Gerhard; Divinski, Sergiy V.
Zr diffusion in BCC refractory high entropy alloys: A case of "non-sluggish" diffusion beh ...
in Acta Materialia vol. 233 (2022)
doi:10.1016/j.actamat.2022.117970 ...

Yadzhak, Nataliya; Andreykiv, Oleksandr; Dolinska, Iryna
Calculational models for mode II and mode III small fatigue crack growth in structural ele ...
in Archive of Applied Mechanics vol. 92 (2022) issue 4. - pp. 1273-1286
doi:10.1007/s00419-022-02104-6 ...

Gottwalt, Albin; Kubaschinski, Paul; Waltz, Manuela; Glatzel, Uwe; Tetzlaff, Ulrich
An Experimental Setup for Fatigue Testing of Thin Electrical Steel Sheets
in International Journal of Fatigue vol. 162 (2022)
doi:10.1016/j.ijfatigue.2022.106987 ...

Chen, Zhenghao; Kishida, Kyosuke; Inui, Haruyuki; Heilmaier, Martin; Glatzel, Uwe; Eggeler, Gunther
Improving the Intermediate- and High-Temperature Strength of L1₂-Co₃(Al,W) by Ni and Ta Ad ...
in Acta Materialia vol. 238 (2022)
doi:10.1016/j.actamat.2022.118224 ...

Yadzhak, Nataliya; Andreykiv, Oleksandr; Lapusta, Yuri
Modelling small fatigue crack propagation under mixed mode II+III loading
in Procedia Structural Integrity vol. 36 (2022) . - pp. 401-407
doi:10.1016/j.prostr.2022.01.052 ...

Andreykiv, Oleksandr; Babii, Andrii; Dolinska, Iryna; Yadzhak, Nataliya; Babii, Mariia
Residual lifetime prediction of field sprayer booms under the action of manoeuvre loading ...
in Procedia Structural Integrity vol. 36 (2022) . - pp. 36-42
doi:10.1016/j.prostr.2021.12.080 ...

Körber, Selina; Völkl, Rainer; Glatzel, Uwe
3D printed polymer positive models for the investment casting of extremely thin-walled sin ...
in Journal of Materials Processing Technology vol. 293 (2021)
doi:10.1016/j.jmatprotec.2021.117095 ...

Hilzenthaler, Marius; Bifano, Luca; Scherm, Florian; Fischerauer, Gerhard; Seemann, Andrea; Glatzel, Uwe
Characterization of recycled AISI 904L superaustenitic steel powder and influence on selec ...
in Powder Technology vol. 391 (2021) . - pp. 57-68
doi:10.1016/j.powtec.2021.06.011 ...

Ulrich, Anke Silvia; Glatzel, Uwe; Galetz, Mathias C.
Discontinuities in Oxidation Kinetics : A New Model and its Application to Cr–Si-Base Allo ...
in Oxidation of Metals vol. 95 (2021) issue 5. - pp. 445-465
doi:10.1007/s11085-021-10029-8 ...

Jahns, Katrin; Ulrich, Anke Silvia; Schlereth, Clara; Reiff, Lukas; Krupp, Ulrich; Galetz, Mathias C.
The Effect of Cu Content and Surface Finish on the Metal Dusting Resistance of Additively ...
in Oxidation of Metals vol. 96 (2021) issue 3. - pp. 241-256
doi:10.1007/s11085-021-10037-8 ...

Taheriniya, Shabnam; Davani, Farnaz A.; Hilke, Sven; Hepp, Marco; Gadelmeier, Christian; Chellali, Mohammed Reda; Boll, Torben; Rösner, Harald; Peterlechner, Martin; Gammer, Christoph; Divinski, Sergiy V.; Butz, Benjamin; Glatzel, Uwe; Hahn, Horst; Wilde, Gerhard
High entropy alloy nanocomposites produced by high pressure torsion
in Acta Materialia vol. 208 (2021)
doi:10.1016/j.actamat.2021.116714 ...

Firlus, Konstantin; Völkl, Rainer; Gabel, Johannes; Glatzel, Uwe
The Influence of Cr, Al, Co, Fe and C on Negative Creep of Waspaloy
in International Journal of Materials Research vol. 112 (2021) issue 2. - pp. 90-97
doi:10.1515/ijmr-2020-7980 ...

Haas, Sebastian; Manzoni, Anna M.; Holzinger, Markus; Glatzel, Uwe
Influence of high melting elements on microstructure, tensile strength and creep resistanc ...
in Materials Chemistry and Physics vol. 274 (2021)
doi:10.1016/j.matchemphys.2021.125163 ...

Mosbacher, Mike; Holzinger, Markus; Galetz, Mathias; Glatzel, Uwe
The Influence of Oxide Color on the Surface Characteristics of Zirconium Alloy ZrNb₇ (wt%) ...
in Oxidation of Metals vol. 95 (2021) issue 5. - pp. 377-388
doi:10.15495/EPub_UBT_00005880 ...

Bernauer, Christian; Grohmann, Sandra; Angermann, Philipp; Dickes, Daniel; Holzberger, Florian; Amend, Pierre; Zäh, Michael F.
Investigation of the Cause-Effect Relationships between the Exothermic Reaction and the Mi ...
in Metals vol. 11 (2021) issue 6
doi:10.3390/met11060876 ...

Manzoni, Anna M.; Dubois, Felix; Mousa, Marwan S.; von Schlippenbach, Christoph; Többens, Daniel M.; Yesilcicek, Yasemin; Zaiser, Erika; Hesse, René; Haas, Sebastian; Glatzel, Uwe
On the Formation of Eutectics in Variations of the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally ...
in Metallurgical and Materials Transactions A vol. 52 (2021) issue 1. - pp. 143-150
doi:10.1007/s11661-020-06091-7 ...

Mengis, Lukas; Ulrich, Anke Silvia; Watermeyer, Philipp; Liebscher, Christian; Galetz, Mathias C.
Oxidation behaviour and related microstructural changes of two β₀–phase containing TiAl al ...
in Corrosion Science vol. 178 (2021)
doi:10.1016/j.corsci.2020.109085 ...

Glatzel, Uwe; Schleifer, Felix; Gadelmeier, Christian; Krieg, Fabian; Müller, Moritz; Mosbacher, Mike; Völkl, Rainer
Quantification of Solid Solution Strengthening and Internal Stresses through Creep Testing ...
in Metals vol. 11 (2021) issue 7
doi:10.3390/met11071130 ...

Lin, Yueh-Yu; Schleifer, Felix; Holzinger, Markus; Ta, Na; Skrotzki, Birgit; Kamachali, Reza Darvishi; Glatzel, Uwe; Fleck, Michael
Quantitative Shape-Classification of Misfitting Precipitates during Cubic to Tetragonal Tr ...
in Materials vol. 14 (2021) issue 6
doi:10.3390/ma14061373 ...

Ta, Na; Umer Bilal, Muhammad; Häusler, Ines; Saxena, Alaukik; Lin, Yueh-Yu; Schleifer, Felix; Fleck, Michael; Glatzel, Uwe; Skrotzki, Birgit; Darvishi Kamachali, Reza
Simulation of the θ’ Precipitation Process with Interfacial Anisotropy Effects in Al-Cu Al ...
in Materials vol. 14 (2021) issue 5
doi:10.3390/ma14051280 ...

Redka, David; Gadelmeier, Christian; Winter, Jan; Spellauge, Maximilian; Eulenkamp, Constanze; Calta, Pavel; Glatzel, Uwe; Minár, Ján; Huber, Heinz P.
Sub-picosecond single-pulse laser ablation of the CrMnFeCoNi high entropy alloy and compar ...
in Applied Surface Science vol. 544 (2021)
doi:10.1016/j.apsusc.2020.148839 ...

Pfizenmaier, Petra; Ulrich, Anke Silvia; Galetz, Mathias C.; Glatzel, Uwe
Tensile creep properties of Cr-Si Alloys at 980 °C in air : Influence of Ge and Mo additio ...
in Metals vol. 11 (2021) issue 7
doi:10.3390/met11071072 ...

Wolff-Goodrich, Silas; Haas, Sebastian; Glatzel, Uwe; Liebscher, Christian H.
Towards superior high temperature properties in low density ferritic AlCrFeNiTi compositio ...
in Acta Materialia vol. 216 (2021)
doi:10.1016/j.actamat.2021.117113 ...

Goyal, Rajendra K.; Tamhane, Parikshit; Tambat, Siddhant
Improvement in dielectric properties of the three-phase GN–BaTiO₃–PEK nanocomposites with ...
in Journal of Materials Science: Materials in Electronics vol. 32 (2021) . - pp. 28468-28479
doi:10.1007/s10854-021-07228-z ...

Mora-García, Alma G.; Mosbacher, Mike; Hastreiter, Julia; Völkl, Rainer; Glatzel, Uwe; Muñoz-Saldaña, Juan
Creep behavior of polycrystalline and single crystal Ni-based superalloys coated with Ta-c ...
in Scripta Materialia vol. 178 (2020) . - pp. 522-526
doi:10.1016/j.scriptamat.2019.12.023 ...

Pfizenmaier, Petra; Ulrich, Anke Silvia; Galetz, Mathias C.; Glatzel, Uwe
Determination of heat treatment parameters by experiments and CALPHAD for precipitate hard ...
in Intermetallics vol. 116 (2020)
doi:10.1016/j.intermet.2019.106636 ...

Zaiser, Erika; Zhou, X. Y.; Manzoni, Anna M.; Haas, Sebastian; Glatzel, Uwe; Zhang, X. P.; Thompson, G. B.; Li, W.; Vogel, F.
Hierarchical phase separation behavior in a Ni-Si-Fe alloy
in Acta Materialia vol. 195 (2020) . - pp. 327-340
doi:10.1016/j.actamat.2020.05.023 ...

Ulrich, Anke Silvia; Pfizenmaier, Petra; Solimani, Ali; Glatzel, Uwe; Galetz, Mathias
Improving the oxidation resistance of Cr-Si-based alloys by ternary alloying
in Corrosion Science vol. 165 (2020)
doi:10.1016/j.corsci.2019.108376 ...

Lin, Yueh-Yu; Schleifer, Felix; Fleck, Michael; Glatzel, Uwe
On the interaction between γ′′ precipitates and dislocation microstructures in Nb containi ...
in Materials Characterization vol. 165 (2020)
doi:10.1016/j.matchar.2020.110389 ...

Galetz, Mathias C.; Ulrich, Anke Silvia; Oskay, Ceyhun; Fähsing, Diana; Laska, Nadine; Schulz, Uwe; Schütze, Michael
Oxidation-induced microstructural changes of the TiAl TNM-B1 alloy after exposure at 900 ° ...
in Intermetallics vol. 123 (2020)
doi:10.1016/j.intermet.2020.106830 ...

Schleifer, Felix; Holzinger, Markus; Lin, Yueh-Yu; Glatzel, Uwe; Fleck, Michael
Phase-field modeling of γ/γ'' microstructure formation in Ni-based superalloys with high γ ...
in Intermetallics vol. 120 (2020)
doi:10.1016/j.intermet.2020.106745 ...

Chen, Dehua; Daoud, Haneen; Scherm, Florian; Klötzer, Bernd; Hauck, Christoph; Glatzel, Uwe
Stainless Steel Powder Produced by a Novel Arc Spray Process
in Journal of Materials Research and Technology vol. 9 (2020) issue 4. - pp. 8314-8322
doi:10.1016/j.jmrt.2020.05.076 ...

Gadelmeier, Christian; Haas, Sebastian; Lienig, Tim; Manzoni, Anna M.; Feuerbacher, Michael; Glatzel, Uwe
Temperature Dependent Solid Solution Strengthening in the High Entropy Alloy CrMnFeCoNi in ...
in Metals vol. 10 (2020) issue 11
doi:10.3390/met10111412 ...

Manzoni, Anna M.; Haas, Sebastian; Kropf, Holger; Duarte Correa, Jazmin Maria; Cakir, Cafer Tufan; Dubois, Felix; Többens, Daniel M.; Glatzel, Uwe
Temperature evolution of lattice misfit in Hf and Mo variations of the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆ ...
in Scripta Materialia vol. 188 (2020) . - pp. 74-79
doi:10.1016/j.scriptamat.2020.07.013 ...

Ulan kyzy, Sonun; Völkl, Rainer; Munz, Oliver; Fischer, Tim; Weizenbach, Sarah; Glatzel, Uwe
Thermo-physical properties of Hastelloy X and Haynes 214 close to the melting range
in Materials Science and Technology vol. 36 (2020) issue 10. - pp. 1012-1019
doi:10.1080/02670836.2020.1753154 ...

Yadzhak, Nataliya
Generalization of the equivalent area method for the case of short fatigue cracks in a thr ...
in Visnyk of the Lviv University : Series Mechanics and Mathematics vol. 89 (2020) . - pp. 106-122
doi:10.30970/vmm.2020.89.106-122 ...

Fischer, Tim; Werner, Ewald; Ulan kyzy, Sonun; Munz, Oliver
Crystal plasticity modeling of polycrystalline Ni-base superalloy honeycombs under combine ...
in Continuum Mechanics and Thermodynamics vol. 31 (2019) issue 3. - pp. 703-713
doi:10.1007/s00161-018-0721-z ...

Popp, Robert; Haas, Sebastian; Scherm, Florian; Redermeier, Alice; Povoden-Karadeniz, Erwin; Göhler, Thomas; Glatzel, Uwe
Determination of Solubility Limits of Refractory Elements in TCP Phases of the Ni-Mo-Cr Te ...
in Journal of Alloys and Compounds vol. 788 (2019) . - pp. 67-74
doi:10.1016/j.jallcom.2019.01.329 ...

Ulan kyzy, Sonun; Völkl, Rainer; Munz, Oliver; Fischer, Tim; Glatzel, Uwe
The Effect of Brazing on Microstructure of Honeycomb Liner Material Hastelloy X
in Journal of Materials Engineering and Performance vol. 28 (2019) issue 4. - pp. 1909-1913
doi:10.1007/s11665-019-03910-w ...

Ta, Na; Wang, Kai; Yin, Xiaoyan; Fleck, Michael; Hüter, Claas
Elastically induced pattern formation in the initial and frustrated growth regime of baini ...
in AIMS Materials Science vol. 6 (2019) issue 1. - pp. 52-62
doi:10.3934/matersci.2019.1.52 ...

Manzoni, Anna M.; Haas, Sebastian; Yu, J. M.; Daoud, Haneen; Glatzel, Uwe; Aboulfadl, Hisham; Mücklich, Frank; Duran, Rüya; Schmitz, Guido; Többens, Daniel M.; Matsumura, Syo; Vogel, Florian; Wanderka, Nelia
Evolution of γ/γ' phases, their misfit and volume fractions in Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ comp ...
in Materials Characterization vol. 154 (2019) . - pp. 363-376
doi:10.1016/j.matchar.2019.06.009 ...

Manzoni, Anna M.; Glatzel, Uwe
New Multiphase Compositionally Complex Alloys Driven by the High Entropy Alloy Approach
in Materials Characterization vol. 147 (2019) . - pp. 512-532
doi:10.1016/j.matchar.2018.06.036 ...

Holzinger, Markus; Schleifer, Felix; Glatzel, Uwe; Fleck, Michael
Phase-field modeling of γ'-precipitate shapes in nickel-base superalloys and their classif ...
in The European Physical Journal B vol. 92 (2019)
doi:10.1140/epjb/e2019-100256-1 ...

Ulrich, Anke Silvia; Kaiser, Timo; Ionescu, Emanuel; Riedel, Ralf; Galetz, Mathias C.
Reactive element effect applied by alloying and SiHfBCN coating on the oxidation of pure c ...
in Oxidation of Metals vol. 92 (2019) . - pp. 281-302
doi:10.1007/s11085-019-09926-w ...

Andreikiv, Oleksandr E.; Shtayura, Nataliya
Computational models of fatigue cracks growth in metallic materials under the action of fo ...
in Materials Science vol. 54 (2019) . - pp. 465-476
doi:10.1007/s11003-019-00206-1 ...

Haas, Sebastian; Manzoni, Anna M.; Krieg, Fabian; Glatzel, Uwe
Microstructure and Mechanical Properties of Precipitate Strengthened High Entropy Alloy Al ...
in Entropy vol. 21 (2019) issue 2
doi:10.3390/e21020169 ...

Lapusta, Yuri; Andreikiv, Oleksandr; Yadzhak, Nataliya
Short crack problem in delayed fracture mechanics
in Procedia Structural Integrity vol. 16 (2019) . - pp. 105-112
doi:10.1016/j.prostr.2019.07.028 ...

Haas, Sebastian; Mosbacher, Mike; Senkov, Oleg N.; Feuerbacher, Michael; Freudenberger, Jens; Gezgin, Senol; Völkl, Rainer; Glatzel, Uwe
Entropy Determination of Single-Phase High Entropy Alloys with Different Crystal Structure ...
in Entropy vol. 20 (2018) issue 9
doi:10.3390/e20090654 ...

Kellner, Peter M.; Völkl, Rainer; Glatzel, Uwe
Influence of Ingot and Powder Metallurgy Production Route on the Tensile Creep Behavior of ...
in Advanced Engineering Materials vol. 20 (2018) issue 1
doi:10.1002/adem.201700751 ...

Mora-García, Alma G.; Ruíz-Luna, Haidee; Mosbacher, Mike; Popp, Robert; Schulz, Uwe; Glatzel, Uwe; Muñoz-Saldaña, Juan
Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on differ ...
in Surface and Coatings Technology vol. 354 (2018) . - pp. 214-225
doi:10.1016/j.surfcoat.2018.09.025 ...

Fischer, Tim; Welzenbach, Sarah; Meier, Felix; Werner, Ewald; Ulan kyzy, Sonun; Munz, Oliver
Modeling the rubbing contact in honeycomb seals
in Continuum Mechanics and Thermodynamics vol. 30 (2018) issue 2. - pp. 381-395
doi:10.1007/s00161-017-0608-4 ...

Trosch, Tanja; Lalire, Fanny; Pommier, Stéphane; Völkl, Rainer; Glatzel, Uwe
Optimization of a jewellery platinum alloy for precision casting : Evaluation of mechanica ...
in Johnson Matthey Technology Review vol. 62 (2018) issue 4. - pp. 364-382
doi:10.1595/205651318X696837 ...

Ulrich, Anke Silvia; Laska, N.; Straubel, A.; Leyens, C.; Braun, R.; Galetz, Mathias C.; Schütze, M.
The oxidation behaviour of aluminium-rich coatings on the TiAl alloy TNM-B1
in Materials at High Temperatures vol. 35 (2018) issue 1-3. - pp. 204-216
doi:10.1080/09603409.2017.1389097 ...

Mosbacher, Mike; Scherm, Florian; Glatzel, Uwe
Oxygen diffusion kinetics of an advanced three step heat treatment for zirconium alloy ZrN ...
in Surface and Coatings Technology vol. 339 (2018) . - pp. 139-146
doi:10.1016/j.surfcoat.2018.02.015 ...

Tirunilai, Aditya Srinivasan; Sas, Jan; Weiss, Klaus-Peter; Chen, Hans; Vinga Szabó, Dorothée; Schlabach, Sabine; Haas, Sebastian; Geissler, David; Freudenberger, Jens; Heilmaier, Martin; Kauffmann, Alexander
Peculiarities of deformation of CoCrFeMnNi at cryogenic temperatures
in Journal of Materials Research vol. 33 (2018) issue 19. - pp. 3287-3300
doi:10.1557/jmr.2018.252 ...

Fleck, Michael; Federmann, Holger; Pogorelov, Evgeny
Phase-field modeling of Li-insertion kinetics in single LiFePO₄-nano-particles for recharg ...
in Computational Materials Science vol. 153 (2018) . - pp. 288-296
doi:10.1016/j.commatsci.2018.06.049 ...

Fleck, Michael; Schleifer, Felix; Holzinger, Markus; Glatzel, Uwe
Phase-Field Modeling of Precipitation Growth and Ripening During Industrial Heat Treatment ...
in Metallurgical and Materials Transactions A vol. 49 (2018) issue 9. - pp. 4146-4157
doi:10.1007/s11661-018-4746-5 ...

Kellner, Peter M.; Dijkstra, Hans; Glatzel, Uwe
Quantitative analysis of Mo–Si–B alloy phases with wavelength dispersive spectroscopy (WDS ...
in X-Ray Spectrometry vol. 47 (2018) issue 2. - pp. 153-158
doi:10.1002/xrs.2824 ...

Ulrich, Anke Silvia; Pfizenmaier, Petra; Solimani, Ali; Glatzel, Uwe; Galetz, Mathias
Strengthened Cr-Si-base alloys for high temperature applications
in International Journal of Refractory Metals and Hard Materials vol. 76 (2018) . - pp. 72-81
doi:10.1016/j.ijrmhm.2018.05.016 ...

Welzenbach, Sarah; Fischer, Tim; Meier, Felix; Werner, Ewald; Ulan kyzy, Sonun; Munz, Oliver
Temperature distribution of a simplified rotor due to a uniform heat source
in Continuum Mechanics and Thermodynamics vol. 30 (2018) issue 2. - pp. 279-290
doi:10.1007/s00161-017-0600-z ...

Manzoni, Anna M.; Haas, Sebastian; Daoud, Haneen; Glatzel, Uwe; Förster, Christiane; Wanderka, Nelia
Tensile Behavior and Evolution of the Phases in the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally ...
in Entropy vol. 20 (2018) issue 9
doi:10.3390/e20090646 ...

Andreikiv, Oleksandr E.; Lysyk, Adriana R.; Shtayura, Nataliya; Babii, Andrii V.
Evaluation of the residual service life of thin-walled structural elements with short corr ...
in Materials Science vol. 53 (2018) . - pp. 514-521
doi:10.1007/s11003-018-0104-4 ...

Pogorelov, Evgeny; Kundin, Julia; Fleck, Michael
Analysis of the dependence of spinodal decomposition in nanoparticles on boundary reaction ...
in Computational Materials Science vol. 140 (2017) . - pp. 105-112
doi:10.1016/j.commatsci.2017.08.028 ...

Gabriel, Tobias; Rommel, Daniel; Scherm, Florian; Gorywoda, Marek; Glatzel, Uwe
Laser Cladding of Ultra-Thin Nickel-Based Superalloy Sheets
in Materials vol. 10 (2017) issue 3
doi:10.3390/ma10030279 ...

Wilhelm, Franz; Affeldt, Ernst; Fleischmann, Ernst; Glatzel, Uwe; Hammer, Joachim
Modeling of the Deformation Behavior of Single Crystalline Nickel-Based Superalloys under ...
in International Journal of Fatigue vol. 97 (2017) . - pp. 1-8
doi:10.1016/j.ijfatigue.2016.12.003 ...

Fleck, Michael; Querfurth, Frank; Glatzel, Uwe
Phase field modeling of solidification in multi-component alloys with a case study on the ...
in Journal of Materials Research vol. 32 (2017) issue 24. - pp. 4605-4615
doi:10.1557/jmr.2017.393 ...

Rommel, Daniel; Terock, Michael; Scherm, Florian; Kuttner, Christian; Glatzel, Uwe
Direct metal deposition of abrasive tracks : Potentials concerning geometry and materials
in Journal of Laser Applications vol. 29 (2017)
doi:10.2351/1.4983230 ...

Andreykiv, Oleksandr E.; Shtayura, Nataliya; Yarema, Roman Ya.
Energy-based approach to evaluation of short fatigue crack growth rate in plates
in Strength of Materials vol. 49 (2017) . - pp. 778-787
doi:10.1007/s11223-018-9923-7 ...

Fedoseeva, Alexandra; Dudova, Nadya; Glatzel, Uwe; Kaibyshev, Rustam
Effect of W on Tempering Behaviour of a 3 %Co Modified P92 Steel
in Journal of Materials Science vol. 51 (2016) issue 20. - pp. 9424-9439
doi:10.1007/s10853-016-0188-x ...

Pérez-González, Francisco A.; Ramírez-Ramírez, Javier H.; Terock, Michael; Garza-Montes-de-Oca, Nelson F.; Glatzel, Uwe; Colás, Rafael
High-temperature Oxidation of a Nickel Base Superalloy at Different Oxygen Partial Pressur ...
in Corrosion Engineering, Science and Technology vol. 51 (2016) issue 7. - pp. 513-521
doi:10.1080/1478422X.2016.1158226 ...

Ladewig, Alexander; Schlick, Georg; Fisser, Maximilian; Schulze, Volker; Glatzel, Uwe
Influence of the shielding gas flow on the removal of process by-products in the selective ...
in Additive Manufacturing vol. 10 (2016) . - pp. 1-9
doi:10.1016/j.addma.2016.01.004 ...

Reinsdorf, Arne; Korth, Wolfgang; Jess, Andreas; Terock, Michael; Klasovsky, Florian; Franke, Robert
Insights into Deactivation and Regeneration of an Industrial Cu/Ni/Cr-Al2O3 Catalyst Durin ...
in ChemCatChem vol. 8 (2016) issue 23. - pp. 3592-3599
doi:10.1002/cctc.201601022 ...

Mertel, Robert; Konrad, Christian; Terock, Michael; Völkl, Rainer; Glatzel, Uwe
Internal oxidation of ternary alloys forming a high oxygen conductive oxide
in Oxidation of Metals vol. 86 (2016) . - pp. 193-203
doi:10.1007/s11085-016-9631-2 ...

Rommel, Daniel; Scherm, Florian; Kuttner, Christian; Glatzel, Uwe
Laser cladding of diamond tools : interfacial reactions of diamond and molten metal
in Surface and Coatings Technology vol. 291 (2016) . - pp. 62-69
doi:10.1016/j.surfcoat.2016.02.014 ...

Trosch, Tanja; Strößner, Johannes; Völkl, Rainer; Glatzel, Uwe
Microstructure and Mechanical Properties of Selective Laser Melted Inconel 718 Compared to ...
in Materials Letters vol. 164 (2016) . - pp. 428-431
doi:10.1016/j.matlet.2015.10.136 ...

Manzoni, Anna M.; Singh, Sheela; Daoud, Haneen; Popp, Robert; Völkl, Rainer; Glatzel, Uwe; Wanderka, Nelia
On the Path to Optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti High Entropy Alloy Family for High Temp ...
in Entropy vol. 18 (2016) issue 4
doi:10.3390/e18040104 ...

Ulrich, Anke Silvia; Galetz, Mathias C.
Protective aluminide coatings for refractory metals
in Oxidation of Metals vol. 86 (2016) issue 5. - pp. 511-535
doi:10.1007/s11085-016-9650-z ...

Terock, Michael; Konrad, Christian; Popp, Robert; Völkl, Rainer; Yang, Fan; McComb, David W.; Mills, Michael J.; Glatzel, Uwe
Tailored platinum-nickel nanostructures on zirconia developed by metal casting, internal o ...
in Corrosion Science vol. 112 (2016) . - pp. 246-254
doi:10.1016/j.corsci.2016.06.010 ...

Schütz, Adelheid; Völkl, Rainer; Bölitz, Marie-Christin; Glatzel, Uwe
Corrosion of Platinum Alloy Electrodes in a LiO₂-Al2O₃-SiO₂ Melt
in European Journal of Glass Science and Technology Part A : Glass Technology vol. 56 (2015) issue 3. - pp. 81-87
http://www.ingentaconnect.com/content/sgt/gta/2015 ...

Azim, Maria A.; Schliephake, Daniel; Hochmuth, Christian; Gorr, Bronislava; Christ, Hans-Jürgen; Glatzel, Uwe; Heilmaier, Martin
Creep Resistance and Oxidation Behavior of Novel Mo-Si-B-Ti Alloys
in JOM : the Journal of the Minerals, Metals & Materials Society vol. 67 (2015) issue 11. - pp. 2621-2628
doi:10.1007/s11837-015-1560-z ...

Mushongera, Leslie T.; Fleck, Michael; Kundin, Julia; Wang, Yunzhi; Emmerich, Heike
Effect of re on directional γ'-coarsening in commercial single crystal Ni-base superalloys ...
in Acta Materialia vol. 93 (2015) . - pp. 60-72
doi:10.1016/j.actamat.2015.03.048 ...

Schütz, Adelheid; Günthner, Martin; Motz, Günter; Greißl, Oliver; Glatzel, Uwe
High Temperature (Salt Melt) Corrosion Tests with Ceramic-Coated Steel
in Materials Chemistry and Physics vol. 159 (2015) . - pp. 10-18
doi:10.1016/j.matchemphys.2015.03.023 ...

Daoud, Haneen; Manzoni, Anna M.; Wanderka, Nelia; Glatzel, Uwe
High-Temperature Tensile Strength of Al₁0Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex Alloy ...
in JOM : the Journal of the Minerals, Metals & Materials Society vol. 67 (2015) issue 10. - pp. 2271-2277
doi:10.1007/s11837-015-1484-7 ...

Fleischmann, Ernst; Konrad, Christian; Preußner, Johannes; Völkl, Rainer; Affeldt, Ernst; Glatzel, Uwe
Influence of Solid Solution Hardening on Creep Properties of Single-Crystal Nickel-Based S ...
in Metallurgical and Materials Transactions A vol. 46 (2015) . - pp. 1125-1130
doi:10.1007/s11661-014-2727-x ...

Manzoni, Anna M.; Daoud, Haneen; Völkl, Rainer; Glatzel, Uwe; Wanderka, Nelia
Influence of W, Mo and Ti Trace Elements on the Phase Separation in Al8Co17Cr17Cu8Fe17Ni33 ...
in Ultramicroscopy vol. 159 (2015) . - pp. 265-271
doi:10.1016/j.ultramic.2015.06.009 ...

Strößner, Johannes; Terock, Michael; Glatzel, Uwe
Mechanical and Microstructural Investigation of Nickel Based Superalloy IN 718 Manufacture ...
in Advanced Engineering Materials vol. 17 (2015) issue 8. - pp. 1099-1105
doi:10.1002/adem.201500158 ...

Manzoni, Anna M.; Singh, Sheela; Daoud, Haneen; Völkl, Rainer; Glatzel, Uwe; Wanderka, Nelia
On the Optimization of the Microstructure and Mechanical Properties of Al-Co-Cr-Cu-Fe-Ni-T ...
in Jordan Journal of Physics vol. 8 (2015) issue 3. - pp. 177-186
http://journals.yu.edu.jo/jjp/JJPIssues/Vol8No3pdf ...

Daoud, Haneen; Manzoni, Anna M.; Wanderka, Nelia; Glatzel, Uwe
Oxidation Behavior of Al₈Co₁₇Cr₁₇Cu₈Fe₁₇Ni₃₃, Al₂₃Co₁₅Cr₂₃Cu₈Fe₁₅Ni₁₅ and ‎Al₁₇Co₁₇Cr₁₇Cu₁ ...
in Advanced Engineering Materials vol. 17 (2015) issue 8. - pp. 1134-1141
doi:10.1002/adem.201500179 ...

Mushongera, Leslie T.; Fleck, Michael; Kundin, Julia; Querfurth, Frank; Emmerich, Heike
Phase-field study of anisotropic γ'-coarsening kinetics in Ni-base superalloys with varyin ...
in Advanced Engineering Materials vol. 17 (2015) issue 8. - pp. 1149-1157
doi:10.1002/adem.201500168 ...

Fleischmann, Ernst; Miller, Michael K.; Affeldt, Ernst; Glatzel, Uwe
Quantitative Experimental Determination of the Solid Solution Hardening Potential of Rheni ...
in Acta Materialia vol. 87 (2015) . - pp. 350-356
doi:10.1016/j.actamat.2014.12.011 ...

Kinzel, Svenja; Gabel, Johannes; Völkl, Rainer; Glatzel, Uwe
Reasons for Volume Contraction after Long-Term Annealing of Waspaloy
in Advanced Engineering Materials vol. 17 (2015) issue 8. - pp. 1106-1112
doi:10.1002/adem.201500159 ...

Fuhrmann, Lars; Konrad, Christian; Völkl, Rainer; Glatzel, Uwe
Transition from Internal to External Oxidation in Binary Ni-Zr and Ternary Ni-Zr-Y Alloys
in Corrosion Science vol. 94 (2015) . - pp. 218-223
doi:10.1016/j.corsci.2015.02.006 ...

Liebscher, Christian H.; Glatzel, Uwe
Configuration of superdislocations in the γ′-Pt₃Al phase of a Pt-based superalloy
in Intermetallics vol. 48 (2014) . - pp. 71-78
doi:10.1016/j.intermet.2013.12.006 ...

Reif, Michael; Scherm, Florian; Galetz, Mathias; Glatzel, Uwe
An Enhanced Three-Step Oxidation Process to Improve Oxide Adhesion on Zirconium Alloys
in Oxidation of Metals vol. 82 (2014) . - pp. 99-112
doi:10.1007/s11085-014-9479-2 ...

Roy, U.; Roy, Himadri; Daoud, Haneen; Glatzel, Uwe; Ray, K. K.
Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloy s ...
in Materials Letters vol. 132 (2014) . - pp. 186-189
doi:10.1016/j.matlet.2014.06.067 ...

Albert, Benedikt; Völkl, Rainer; Glatzel, Uwe
High-Temperature Oxidation Behavior of Two Nickel-Based Superalloys Produced by Metal Inje ...
in Metallurgical and Materials Transactions A vol. 45 (2014) issue 10. - pp. 4561-4571
doi:10.1007/s11661-014-2391-1 ...

Hochmuth, Christian; Schliephake, Daniel; Völkl, Rainer; Heilmaier, Martin; Glatzel, Uwe
Influence of zirconium content on microstructure and creep properties of Mo--9Si--8B alloy ...
in Intermetallics vol. 48 (2014) . - pp. 3-9
doi:10.1016/j.intermet.2013.08.017 ...

Konrad, Christian; Völkl, Rainer; Glatzel, Uwe
A novel method for the preparation of porous zirconia ceramics with multimodal pore size d ...
in Journal of the European Ceramic Society vol. 34 (2014) issue 5. - pp. 1311-1319
doi:10.1016/j.jeurceramsoc.2013.11.014 ...

Strößner, Johannes; Konrad, Christian; Brunner, Martin; Völkl, Rainer; Glatzel, Uwe
Influence of casting surface on creep behaviour of thin-wall Ni-base superalloy Inconel100
in Journal of Materials Processing Technology vol. 213 (2013) issue 5. - pp. 722-727
doi:10.1016/j.jmatprotec.2012.11.024 ...

Bensch, Matthias; Konrad, Christian; Fleischmann, Ernst; Rae, Catherine M. F.; Glatzel, Uwe
Influence of oxidation on near-surface γ' fraction and resulting creep behaviour of single ...
in Materials Science and Engineering: A vol. 577 (2013) . - pp. 179-188
doi:10.1016/j.msea.2013.04.032 ...

Manzoni, Anna M.; Daoud, Haneen; Mondal, Swastik; van Smaalen, Sander; Völkl, Rainer; Glatzel, Uwe; Wanderka, Nelia
Investigation of phases in Al₂₃Co₁₅Cr₂₃Cu₈Fe₁₅Ni₁₆ and Al₈Co₁₇Cr₁₇Cu₈Fe₁₇Ni₃₃ high entropy ...
in Journal of Alloys and Compounds vol. 552 (2013) . - pp. 430-436
doi:10.1016/j.jallcom.2012.11.074 ...

Daoud, Haneen; Manzoni, Anna M.; Völkl, Rainer; Wanderka, Nelia; Glatzel, Uwe
Microstructure and Tensile Behavior of Al8Co17Cr17Cu8Fe17Ni33 (at.%) High-Entropy Alloy
in JOM : the Journal of the Minerals, Metals & Materials Society vol. 65 (2013) issue 12. - pp. 1805-1814
doi:10.1007/s11837-013-0756-3 ...

Manzoni, Anna M.; Daoud, Haneen; Völkl, Rainer; Glatzel, Uwe; Wanderka, Nelia
Phase separation in equiatomic AlCoCrFeNi high-entropy alloy
in Ultramicroscopy vol. 132 (2013) . - pp. 212-215
doi:10.1016/j.ultramic.2012.12.015 ...

Roy, Himadri; Ray, Ayan; Barat, K.; Hochmuth, Christian; Sivaprasad, S.; Tarafder, S.; Glatzel, Uwe; Ray, K. K.
Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AIS ...
in Materials Science and Engineering: A vol. 561 (2013) . - pp. 88-99
doi:10.1016/j.msea.2012.10.074 ...

Terock, Michael; Fleischmann, Ernst; Hochmuth, Christian; Völkl, Rainer; Glatzel, Uwe
Synthesis and characterization of a Pt–Al–Cr–Ni γ/γ′-coating on the Ni-based superalloy CM ...
in Surface and Coatings Technology vol. 236 (2013) . - pp. 347-352
doi:10.1016/j.surfcoat.2013.10.011 ...

Schütz, Adelheid; Günthner, Martin; Motz, Günter; Greißl, Oliver; Glatzel, Uwe
Characterisation of novel precursor-derived ceramic coatings with glass filler particles o ...
in Surface and Coatings Technology vol. 207 (2012) . - pp. 319-327
doi:10.1016/j.surfcoat.2012.07.013 ...

Konrad, Christian; Völkl, Rainer; Glatzel, Uwe
Determination of Oxygen Diffusion Along Nickel/Zirconia Phase Boundaries by Internal Oxida ...
in Oxidation of Metals vol. 77 (2012) issue 3. - pp. 149-165
doi:10.1007/s11085-011-9278-y ...

Mukherji, Debashis; Rösler, Joachim; Krüger, Manja; Heilmaier, Martin; Bölitz, Marie-Christin; Völkl, Rainer; Glatzel, Uwe; Szentmiklósi, L.
The effects of boron addition on the microstructure and mechanical properties of Co-Re-bas ...
in Scripta Materialia vol. 66 (2012) issue 1. - pp. 60-63
doi:10.1016/j.scriptamat.2011.10.007 ...

Burk, Steffen; Gorr, Bronislava; Christ, Hans-Jürgen; Schliephake, Daniel; Heilmaier, Martin; Hochmuth, Christian; Glatzel, Uwe
High-temperature oxidation behaviour of a single-phase (Mo,Ti)5Si3 (Mo--Si--Ti) alloy
in Scripta Materialia vol. 66 (2012) issue 5. - pp. 223-226
doi:10.1016/j.scriptamat.2011.10.042 ...

Konrad, Christian; Fuhrmann, Lars; Völkl, Rainer; Glatzel, Uwe
Internal oxidation with significant contribution of oxygen diffusion through the oxide pha ...
in Corrosion Science vol. 63 (2012) . - pp. 187-192
doi:10.1016/j.corsci.2012.06.003 ...

Scherm, Florian; Bezold, Johannes; Glatzel, Uwe
Laser welding of Mg alloy MgAl3Zn1 (AZ31) to Al alloy AlMg3 (AA5754) using ZnAl filler mat ...
in Science and Technology of Welding and Joining vol. 17 (2012) issue 5. - pp. 364-367
doi:10.1179/136217112X13333824902080 ...

Bölitz, Marie-Christin; Brunner, Martin; Völkl, Rainer; Mukherji, Debashis; Rösler, Joachim; Glatzel, Uwe
Microstructural and analytical study of boron-doped Co-Re-Cr alloys using transmission ele ...
in International Journal of Materials Research vol. 103 (2012) issue 5. - pp. 554-558
doi:10.3139/146.110729 ...

Bensch, Matthias; Sato, Atrushi; Warnken, Niels; Affeldt, Ernst; Reed, Roger C.; Glatzel, Uwe
Modelling of High Temperature Oxidation of Alumina-Forming Single-Crystal Nickel-Base Supe ...
in Acta Materialia vol. 60 (2012) issue 15. - pp. 5468-5480
doi:10.1016/j.actamat.2012.06.036 ...

Degenhardt, Ulrich; Stegner, Frank; Liebscher, Christian H.; Glatzel, Uwe; Berroth, Karl; Motz, Günter; Krenkel, Walter
Sintered Silicon Nitride/Nano-Silicon Carbide Materials Based on Preceramic Polymers and C ...
in Journal of the European Ceramic Society vol. 32 (2012) issue 9. - pp. 1893-1899
doi:10.1016/j.jeurceramsoc.2011.09.007 ...

Brunner, Martin; Bensch, Matthias; Völkl, Rainer; Affeldt, Ernst; Glatzel, Uwe
Thickness influence on creep properties for Ni-based superalloy M247LC SX
in Materials Science and Engineering: A vol. 550 (2012) . - pp. 254-262
doi:10.1016/j.msea.2012.04.067 ...

Fleck, Michael; Pilipenko, Denis; Spatschek, Robert; Brener, Efim A.
Brittle fracture in viscoelastic materials as a pattern-formation process
in Physical Review E vol. 83 (2011) issue 4
doi:10.1103/PhysRevE.83.046213 ...

Schmalz, Thomas; Kraus, Tobias; Günthner, Martin; Liebscher, Christian H.; Glatzel, Uwe; Kempe, Rhett; Motz, Günter
Catalytic formation of carbon phases in metal modified, porous polymer derived SiCN cerami ...
in Carbon vol. 49 (2011) issue 9. - pp. 3065-3072
doi:10.1016/j.carbon.2011.03.027 ...

Singh, Sheela; Wanderka, Nelia; Murty, B. S.; Glatzel, Uwe; Banhart, John
Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy
in Acta Materialia vol. 59 (2011) issue 1. - pp. 182-190
doi:10.1016/j.actamat.2010.09.023 ...

Konrad, Christian; Brunner, Martin; Kyrgyzbaev, Kanat; Völkl, Rainer; Glatzel, Uwe
Determination of heat transfer coefficient and ceramic mold material parameters for alloy ...
in Journal of Materials Processing Technology vol. 211 (2011) issue 2. - pp. 181-186
doi:10.1016/j.jmatprotec.2010.08.031 ...

Günthner, Martin; Schütz, Adelheid; Glatzel, Uwe; Wang, Kaishi; Bordia, Rajendra K.; Greißl, Oliver; Motz, Günter; Krenkel, Walter
High Performance Environmental Barrier Coatings, Part I: Passive Filler Loaded SiCN System ...
in Journal of the European Ceramic Society vol. 31 (2011) issue 15. - pp. 3003-3010
doi:10.1016/j.jeurceramsoc.2011.05.027 ...

Teichmann, Katharina; Liebscher, Christian H.; Völkl, Rainer; Vorberg, Stefan; Glatzel, Uwe
High Temperature Strengthening Mechanisms in the Alloy Platinum-5% Rhodium DPH
in Platinum Metals Review vol. 55 (2011) issue 4. - pp. 217-224
doi:10.1595/147106711X591971 ...

Keller, Thomas F.; Engelhardt, Hannes; Adam, Peter; Galetz, Mathias; Glatzel, Uwe; Jandt, Klaus D.
Near-Surface Microstructural Reorganization of UHMWPE under Cyclic Load : A Pilot Study
in Advanced Engineering Materials vol. 13 (2011) issue 12. - pp. B476-B482
doi:10.1002/adem.201180058 ...

Franke, Martin M.; Hilbinger, Rolf M.; Konrad, Christian; Glatzel, Uwe; Singer, R. F.
Numerical Determination of Secondary Dendrite Arm Spacing for IN738LC Investment Castings
in Metallurgical and Materials Transactions A vol. 42 (2011) issue 7. - pp. 1847-1853
doi:10.1007/s11661-010-0585-8 ...

Pilipenko, Denis; Fleck, Michael; Emmerich, Heike
On numerical aspects of phase-field fracture modelling
in The European Physical Journal Plus vol. 126 (2011)
doi:10.1140/epjp/i2011-11100-3 ...

Fleck, Michael; Mushongera, Leslie T.; Pilipenko, Denis; Kumar, Ankit; Emmerich, Heike
On phase-field modeling with a highly anisotropic interfacial energy
in The European Physical Journal Plus vol. 126 (2011)
doi:10.1140/epjp/i2011-11095-7 ...

Galetz, Mathias; Fleischmann, Ernst; Konrad, Christian; Schütz, Adelheid; Glatzel, Uwe
Abrasion resistance of oxidized zirconium in comparison with CoCrMo and titanium nitride c ...
in Journal of Biomedical Materials Research Part B: Applied biomaterials vol. 93 (2010) issue 1. - pp. 244-251
doi:10.1002/jbm.b.31581 ...

Galetz, Mathias; Glatzel, Uwe
An activated energy approach for accelerated testing of the deformation of UHMWPE in artif ...
in Journal of the Mechanical Behavior of Biomedical Materials vol. 3 (2010) issue 4. - pp. 331-338
doi:10.1016/j.jmbbm.2010.01.004 ...

Galetz, Mathias; Uth, Tobias; Wimmer, Markus A.; Adam, Peter; Glatzel, Uwe
Determination of the temperature rise within UHMWPE tibial components during tribological ...
in Acta Biomaterialia vol. 6 (2010) issue 2. - pp. 552-562
doi:10.1016/j.actbio.2009.06.023 ...

Negahdari, Zahra; Willert-Porada, Monika; Scherm, Florian
Development of Novel Functionally Graded Al₂O₃-Lanthanum Hexaaluminate Ceramics for Therma ...
in Materials Science Forum vol. 631-632 (2010) . - pp. 97-102
doi:10.4028/www.scientific.net/MSF.631-632.97 ...

Fleck, Michael; Brener, Efim A.; Spatschek, Robert; Eidel, Bernhard
Elastic and plastic effects on solid-state transformations : a phase field study
in International Journal of Materials Research vol. 101 (2010) issue 4. - pp. 462-466
doi:10.3139/146.110295 ...

Preußner, Johannes; Fleischmann, Ernst; Völkl, Rainer; Glatzel, Uwe
Enrichment of Boron at Grain Boundaries of Platinum-Based Alloys Determined by Electron En ...
in International Journal of Materials Research vol. 101 (2010) issue 5. - pp. 577-579
doi:10.3139/146.110320 ...

Schütz, Michael R.; Deeken, Stefan; Adasch, Volker; Liebscher, Christian H.; Glatzel, Uwe; Senker, Jürgen; Breu, Josef; Sattler, Katrin; Klein, Otto
Improvement of thermal and mechanical properties of a phenolic resin nanocomposite by in s ...
in Journal of Applied Polymer Science vol. 117 (2010) issue 4. - pp. 2272-2277
doi:10.1002/app.32004 ...

Nikulina, Elizaveta; Völkl, Rainer; Glatzel, Uwe
Measurement of the Lattice Misfit of Pt-Al-Cr Superalloy by Convergent Beam Electron Diffr ...
in International Journal of Materials Research vol. 101 (2010) issue 5. - pp. 580-584
doi:10.3139/146.110311 ...

Scherm, Florian; Völkl, Rainer; Neubrand, A.; Bosbach, Franz; Glatzel, Uwe
Mechanical characterisation of interpenetrating network metal–ceramic composites
in Materials Science and Engineering: A vol. 527 (2010) issue 4-5. - pp. 1260-1265
doi:10.1016/j.msea.2009.09.063 ...

Nikulina, Elizaveta; Durst, Karsten; Göken, Mathias; Völkl, Rainer; Glatzel, Uwe
Microstructural and Micromechanical Characterisation of a Pt-Al-Cr-Ni-Re Alloy by means of ...
in International Journal of Materials Research vol. 101 (2010) issue 5. - pp. 585-588
doi:10.3139/146.110316 ...

Bensch, Matthias; Preußner, Johannes; Hüttner, Rainer; Obigodi, Georgia; Sannakaisa, Virtanen; Glatzel, Uwe; Gabel, Johannes
Modelling and analysis of the oxidation influence on creep behaviour of thin-walled struct ...
in Acta Materialia vol. 58 (2010) issue 5. - pp. 1607-1617
doi:10.1016/j.actamat.2009.11.004 ...

Galetz, Mathias; Glatzel, Uwe
Molecular Deformation Mechanisms in UHMWPE During Tribological Loading in Artificial Joint ...
in Tribology Letters vol. 38 (2010) issue 1. - pp. 1-13
doi:10.1007/s11249-009-9563-y ...

Fleck, Michael; Hüter, Claas; Pilipenko, Denis; Spatschek, Robert; Brener, Efim A.
Pattern formation during diffusion limited transformations in solids
in Philosophical Magazine vol. 90 (2010) issue 1-4. - pp. 265-286
doi:10.1080/14786430903193241 ...

Galetz, Mathias; Seiferth, Sabine H.; Theile, Benjamin; Glatzel, Uwe
Potential for adhesive wear in friction couples of UHMWPE running against oxidized zirconi ...
in Journal of Biomedical Materials Research Part B: Applied biomaterials vol. 93 (2010) issue 2. - pp. 468-475
doi:10.1002/jbm.b.31604 ...

Negahdari, Zahra; Willert-Porada, Monika; Scherm, Florian
Thermal properties of homogenous lanthanum hexaaluminate/alumina composite ceramics
in Journal of the European Ceramic Society vol. 30 (2010) issue 15. - pp. 3103-3109
doi:10.1016/j.jeurceramsoc.2010.07.026 ...

Brunner, Martin; Hüttner, Rainer; Bölitz, Marie-Christin; Völkl, Rainer; Mukherji, Debashis; Rösler, Joachim; Depka, Timo; Somsen, Christoph; Eggeler, Gunther; Glatzel, Uwe
Creep properties beyond 1100°C and microstructure of Co-Re-Cr alloys
in Materials Science and Engineering: A vol. 528 (2010) issue 2. - pp. 650-656
doi:10.1016/j.msea.2010.09.035 ...

Preußner, Johannes; Prins, Sara; Völkl, Rainer; Liu, Zi-Kui; Glatzel, Uwe
Determination of phases in the system chromium-platinum (Cr-Pt) and thermodynamic calculat ...
in Materials Science and Engineering: A vol. 510-511 (2009) . - pp. 322-327
doi:10.1016/j.msea.2008.10.059 ...

Völkl, Rainer; Wenderoth, Markus; Preußner, Johannes; Vorberg, Stefan; Fischer, Bernd; Yamabe-Mitarai, Y.; Harada, H.; Glatzel, Uwe
Development of a precipitation-strengthened Pt-base superalloy
in Materials Science and Engineering: A vol. 510-511 (2009) . - pp. 328-331
doi:10.1016/j.msea.2008.12.034 ...

Preußner, Johannes; Rudnik, Yegor; Brehm, Holger; Völkl, Rainer; Glatzel, Uwe
A dislocation density based material model to simulate the anisotropic creep behavior of s ...
in International Journal of Plasticity vol. 25 (2009) issue 5. - pp. 973-994
doi:10.1016/j.ijplas.2008.04.006 ...

Liebscher, Christian H.; Völkl, Rainer; Glatzel, Uwe
Electron energy losses by channelling-enhanced microanalysis in a ɣ​'-strengthened Ni-base ...
in Acta Materialia vol. 57 (2009) issue 14. - pp. 4217-4223
doi:10.1016/j.actamat.2009.05.019 ...

Galetz, Mathias; Fleischmann, Ernst; Glatzel, Uwe
Femur materials for artificial knee joints : adhesive wear and potential for future develo ...
in Biomaterialien vol. 10 (2009) issue 1-2. - pp. 45

Hüttner, Rainer; Gabel, Johannes; Glatzel, Uwe; Völkl, Rainer
First creep results on thin-walled single-crystal superalloys
in Materials Science and Engineering: A vol. 510-511 (2009) . - pp. 307-311
doi:10.1016/j.msea.2008.10.057 ...

Heilmaier, Martin; Krüger, Manja; Saage, H.; Rösler, Joachim; Mukherji, Debashis; Glatzel, Uwe; Völkl, Rainer; Hüttner, Rainer; Eggeler, Gunther; Somsen, Christoph; Depka, Timo; Christ, Hans-Jürgen; Gorr, Bronislava; Burk, Steffen
Metallic Materials for Structural Applications Beyond Nickel-Based Superalloys
in JOM : the Journal of the Minerals, Metals & Materials Society vol. 61 (2009) issue 7. - pp. 61-67
doi:10.1007/s11837-009-0106-7 ...

Scherm, Florian; Völkl, Rainer; van Smaalen, Sander; Mondal, Swastik; Plamondon, Philippe; L'Esperance, Gilles; Bechmann, Florian; Glatzel, Uwe
Microstructural characterization of interpenetrating light weight metal matrix composites
in Materials Science and Engineering: A vol. 518 (2009) issue 1-2. - pp. 118-123
doi:10.1016/j.msea.2009.04.010 ...

Kunst, Martin; Fischersworring-Bunk, Andreas; L'Esperance, Gilles; Plamondon, Philippe; Glatzel, Uwe
Microstructure and dislocation analysis after creep deformation of die-cast Mg-Al-Sr (AJ) ...
in Materials Science and Engineering: A vol. 510-511 (2009) . - pp. 387-392
doi:10.1016/j.msea.2008.07.078 ...

Schütz, Adelheid; Müller, Dieter; Reichert, P.; Glatzel, Uwe
Partial Laser and Gas Nitriding of Titanium Components
in HTM Journal of Heat Treatment and Materials vol. 64 (2009) issue 5. - pp. 270-277
doi:10.3139/105.110034 ...

Brener, Efim A.; Boussinot, Guillaume; Hüter, Claas; Fleck, Michael; Pilipenko, Denis; Spatschek, Robert; Temkin, D. E.
Pattern formation during diffusional transformations in the presence of triple junctions a ...
in Journal of Physics: Condensed Matter vol. 21 (2009) issue 46
doi:10.1088/0953-8984/21/46/464106 ...

Liebscher, Christian H.; Preußner, Johannes; Völkl, Rainer; Glatzel, Uwe
Atomic site location by channelling enhanced microanalysis (ALCHEMI) in γ′-strengthened Ni ...
in Acta Materialia vol. 56 (2008) issue 16. - pp. 4267-4276
doi:10.1016/j.actamat.2008.04.044 ...

Preußner, Johannes; Prins, Sara; Wenderoth, Markus; Völkl, Rainer; Glatzel, Uwe
Building a Thermodynamic Database for Platinum-Based Superalloys: Part III
in Platinum Metals Review vol. 52 (2008) issue 1. - pp. 48-51
doi:10.1595/147106708X255167 ...

Preußner, Johannes; Völkl, Rainer; Glatzel, Uwe
Creep 2008: 11th International Conference on Creep and Fracture of Engineering Materials a ...
in Platinum Metals Review vol. 52 (2008) issue 4. - pp. 241-242
doi:10.1595/147106708X363888 ...

Rudnik, Yegor; Völkl, Rainer; Vorberg, Stefan; Glatzel, Uwe
The effects of Ta additions on the phase compositions and high temperature properties of P ...
in Materials Science and Engineering: A vol. 479 (2008) issue 1-2. - pp. 306-312
doi:10.1016/j.msea.2007.06.066 ...

Völkl, Rainer; Fischer, Bernd; Beschliesser, Manuel; Glatzel, Uwe
Evaluating strength at ultra-high temperatures - methods and results
in Materials Science and Engineering: A vol. 483-484 (2008) . - pp. 587-589
doi:10.1016/j.msea.2006.09.171 ...

Wenderoth, Markus; Vorberg, Stefan; Fischer, Bernd; Yamabe-Mitarai, Y.; Harada, H.; Glatzel, Uwe; Völkl, Rainer
Influence of Nb, Ta and Ti on microstructure and high-temperature strength of precipitatio ...
in Materials Science and Engineering: A vol. 483-484 (2008) . - pp. 509-511
doi:10.1016/j.msea.2006.12.160 ...

Cornish, Lesley A.; Süss, Rainer; Watson, Andy; Preußner, Johannes; Prins, Sara; Wenderoth, Markus; Völkl, Rainer; Glatzel, Uwe
Building a database for the prediction of phases in Pt-based superalloys
in Journal of the Southern African Institute of Mining and Metallurgy vol. 107 (2007) . - pp. 713-724
http://www.saimm.co.za/Journal/v107n11p713.pdf

Galetz, Mathias; Blaß, T.; Ruckdäschel, Holger; Sandler, Jan K. W.; Altstädt, Volker; Glatzel, Uwe
Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological appli ...
in Journal of Applied Polymer Science vol. 104 (2007) issue 6. - pp. 4173-4181
doi:10.1002/app.26058 ...

Wloka, J.; Laukant, Holger; Glatzel, Uwe; Virtanen, S.
Corrosion properties of laser beam joints of aluminium with zinc-coated steel
in Corrosion Science vol. 49 (2007) issue 11. - pp. 4243-4258
doi:10.1016/j.corsci.2007.04.014 ...

Schrinner, Marc C.; Polzer, Frank; Mei, Yu; Lu, Yan; Haupt, Björn; Ballauff, Matthias; Göldel, Astrid; Drechsler, Markus; Preussner, Johannes; Glatzel, Uwe
Cover: Macromolecular Chemistry and Physics 208 (2007) Issue 14
in Macromolecular Chemistry and Physics vol. 208 (2007) issue 14. - pp. 1485
doi:10.1002/macp.200790028 ...

Galetz, Mathias; Goetz, C.; Adam, Peter; Glatzel, Uwe
Hysteretic Heating During Cyclic Loading of Medical Grade Ultra High Molecular Weight Poly ...
in Advanced Engineering Materials vol. 9 (2007) issue 12. - pp. 1089-1096
doi:10.1002/adem.200700274 ...

Spatschek, Robert; Fleck, Michael
Influence of stress on interface kinetics
in Philosophical Magazine Letters vol. 87 (2007) issue 11. - pp. 909-914
doi:10.1080/09500830701416618 ...

Wenderoth, Markus; Vorberg, Stefan; Fischer, Bernd; Völkl, Rainer; Glatzel, Uwe
Isothermal Oxidation Behavior of a Precipitation-Hardened Pt-Base Alloy with Additions of ...
in International Journal of Materials Research vol. 98 (2007) issue 6. - pp. 463-467
doi:10.3139/146.101498 ...

Schrinner, Marc C.; Polzer, Frank; Mei, Yu; Lu, Yan; Haupt, Björn; Ballauff, Matthias; Grödel, Astrid; Drechsler, Markus; Preußner, Johannes; Glatzel, Uwe
Mechanism of the Formation of Amorphous Gold Nanoparticles within Spherical Polyelectrolyt ...
in Macromolecular Chemistry and Physics vol. 208 (2007) issue 14. - pp. 1542-1547
doi:10.1002/macp.200700161 ...

Wenderoth, Markus; Völkl, Rainer; Vorberg, Stefan; Yamabe-Mitarai, Y.; Harada, H.; Glatzel, Uwe
Microstructure, oxidation resistance and high-temperature strength of γ′ hardened Pt-base ...
in Intermetallics vol. 15 (2007) issue 4. - pp. 539-549
doi:10.1016/j.intermet.2006.09.009 ...

Zambaldi, C.; Roters, F.; Raabe, D.; Glatzel, Uwe
Modeling and experiments on the indentation deformation and recrystallization of a single- ...
in Materials Science and Engineering: A vol. 454-455 (2007) . - pp. 433-440
doi:10.1016/j.msea.2006.11.068 ...

Cornish, Lesley A.; Süss, Rainer; Völkl, Rainer; Wenderoth, Markus; Vorberg, Stefan; Fischer, Bernd; Glatzel, Uwe; Douglas, Alistair; Chown, Lesley H.; Murakumo, T.; Preußner, Johannes; Lupton, David; Glaner, Lesley; Maledi, N. B.; Potgieter, J. H.; Sephton, M.; Williams, G.
Overview of the development of new Pt-based alloys for high temperature application in agg ...
in Journal of the Southern African Institute of Mining and Metallurgy vol. 107 (2007) . - pp. 697-711
http://www.saimm.co.za/Journal/v107n11p697.pdf

Reissig, Lutz; Czubayko, Ulrich; Wanderka, Nelia; Völkl, Rainer; Glatzel, Uwe
Comparison of oxide measurement techniques applied to Ti6Al4V
in Materials Characterization vol. 55 (2005) issue 2. - pp. 153-159
doi:10.1016/j.matchar.2005.05.001 ...

Preußner, Johannes; Rudnik, Yegor; Völkl, Rainer; Glatzel, Uwe
Finite-element modelling of anisotropic single-crystal superalloy creep deformation based ...
in Zeitschrift für Metallkunde vol. 96 (2005) issue 6. - pp. 595-601
doi:10.3139/146.101076 ...

Laukant, Holger; Wallmann, Clemens; Korte, Michael; Glatzel, Uwe
Flux-less joining technique of aluminium with zinc-coated steel sheets by a dual-spot-lase ...
in Advanced Materials Research vol. 6-8 (2005) . - pp. 163-170
doi:10.4028/www.scientific.net/AMR.6-8.163 ...

Laukant, Holger; Wallmann, Clemens; Müller, Markus; Glatzel, Uwe; Korte, Michael; Stirn, Boris; Haldenwanger, Hans-Günther
Fluxless laser beam joining of aluminium with zinc coated steel
in Science and Technology of Welding and Joining vol. 10 (2005) issue 2. - pp. 219-226
doi:10.1179/174329305X37051 ...

Wenderoth, Markus; Cornish, Lesley A.; Süss, Rainer; Vorberg, Stefan; Fischer, Bernd; Glatzel, Uwe; Völkl, Rainer
On the Development and Investigation of Quaternary Pt-Based Superalloys with Ni Additions
in Metallurgical and Materials Transactions A vol. 36 (2005) issue 3. - pp. 567-575
doi:10.1007/s11661-005-0171-7 ...

Hüller, Markus; Wenderoth, Markus; Vorberg, Stefan; Fischer, Bernd; Glatzel, Uwe; Völkl, Rainer
Optimization of Composition and Heat Treatment of Age-Hardened Pt-Al-Cr-Ni Alloys
in Metallurgical and Materials Transactions A vol. 36 (2005) issue 13. - pp. 681-689
doi:10.1007/s11661-005-1000-8 ...

Müller, Markus; Wallmann, Clemens; Laukant, Holger; Glatzel, Uwe
Prozesstoleranzen des flussmittelfreien Laserstrahlschweißlötens
in Schweißen und Schneiden vol. 57 (2005) issue 6. - pp. 250-255
http://www.metalle.uni-bayreuth.de/de/download/pub ...

Vorberg, Stefan; Wenderoth, Markus; Fischer, Bernd; Glatzel, Uwe; Völkl, Rainer
A TEM investigation of the ɣ/ɣ' phase boundary in Pt-based superalloys
in JOM : the Journal of the Minerals, Metals & Materials Society vol. 57 (2005) issue 3. - pp. 49-51
doi:10.1007/s11837-005-0233-8 ...

Kloss, Bärbel; Wenderoth, Markus; Glatzel, Uwe; Völkl, Rainer
Fast internal oxidation of Ni-Zr-Y alloys at low Oxygen pressure
in Oxidation of Metals vol. 61 (2004) issue 3-4. - pp. 239-251
doi:10.1023/B:OXID.0000025333.36579.b9 ...

Wallmann, Clemens; Glatzel, Uwe
Herstellung und Eigenschaften von laserbeschichteten Diamanttrennschleifscheiben (Teil 1)
in Industrie-Diamanten-Rundschau vol. 38 (2004) issue 3. - pp. 283-292
http://www.metalle.uni-bayreuth.de/de/download/pub ...

Wallmann, Clemens; Glatzel, Uwe
Herstellung und Eigenschaften von laserbeschichteten Diamanttrennschleifscheiben (Teil 2)
in Industrie-Diamanten-Rundschau vol. 38 (2004) issue 4. - pp. 392-402
http://www.metalle.uni-bayreuth.de/de/download/pub ...

Reissig, Lutz; Völkl, Rainer; Mills, Michael J.; Glatzel, Uwe
Investigation of near surface structure in order to determine process-temperatures during ...
in Scripta Materialia vol. 50 (2004) issue 1. - pp. 121-126
doi:10.1016/j.scriptamat.2003.09.023 ...

Vorberg, Stefan; Wenderoth, Markus; Fischer, Bernd; Glatzel, Uwe; Völkl, Rainer
Pt-Al-Cr-Ni Superalloys: Heat Treatment and Microstructure
in JOM : the Journal of the Minerals, Metals & Materials Society vol. 56 (2004) issue 9. - pp. 40-43
doi:10.1007/s11837-004-0199-y ...

Koubassov, V.; Laprise, J. F.; Théberge, F.; Förster, E.; Sauerbrey, Roland; Müller, B.; Glatzel, Uwe; Chin, S. L.
Ultrafast laser-induced melting of glass
in Applied Physics A vol. 79 (2004) issue 3. - pp. 499-505
doi:10.1007/s00339-003-2474-0 ...

Gorelik, Tatiana; Urban, Sabine; Falk, Fritz; Kaiser, Ute; Glatzel, Uwe
Carbon onions produced by laser irradiation of amorphous silicon carbide
in Chemical Physics Letters vol. 373 (2003) issue 5-6. - pp. 642-645
doi:10.1016/S0009-2614(03)00677-8 ...

Wöllmer, Silke; Zaefferer, Stefan; Göken, Mathias; Mack, Thomas; Glatzel, Uwe
Characterization of phases of aluminized nickel base superalloys
in Surface and Coatings Technology vol. 167 (2003) issue 1. - pp. 83-96
doi:10.1016/S0257-8972(02)00843-5 ...

Reissig, Lutz; Czubayko, Ulrich; Wanderka, Nelia; Völkl, Rainer; Glatzel, Uwe
Determination of the local Oxygen distribution in a commercial Titanium alloy by 3-dimensi ...
in Zeitschrift für Metallkunde vol. 94 (2003) issue 6. - pp. 771-773
http://www.metalle.uni-bayreuth.de/de/download/pub ...

Gorelik, Tatiana; Will, M.; Nolte, S.; Tünnermann, A.; Glatzel, Uwe
Transmission electron microscopy studies of femtosecond laser induced modifications in qua ...
in Applied Physics A vol. 76 (2003) . - pp. 309-311
doi:10.1007/s00339-002-1813-x ...

Schubert, Christian; Kaiser, Ute; Hedler, A.; Wesch, Werner; Gorelik, Tatiana; Glatzel, Uwe; Kräußlich, J.; Wunderlich, B.; Hess, G.; Goetz, K.
Nanocrystal formation in SiC by Ge ion implantation and subsequent thermal annealing
in Journal of Applied Physics vol. 91 (2002) issue 3. - pp. 1520-1524
doi:10.1063/1.1430539 ...

Zaefferer, Stefan; Glatzel, Uwe
Orientation Relationship of Phases in an Oxidation Protection Coating on a Ni-Based Supera ...
in Materials Science Forum vol. 408-412 (2002) . - pp. 1531-1536
doi:10.4028/www.scientific.net/MSF.408-412.1531 ...

Schubert, Christian; Wesch, Werner; Kaiser, Ute; Hedler, A.; Gärtner, K.; Gorelik, Tatiana; Glatzel, Uwe
Synthesis of group IV nanocrystals in SiC by ion beam processing
in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms vol. 191 (2002) issue 1-4. - pp. 428-432
doi:10.1016/S0168-583X(02)00586-4 ...

Gorelik, Tatiana; Kaiser, Ute; Schubert, Christian; Wesch, Werner; Glatzel, Uwe
Transmission electron microscopy study of Ge implanted into SiC
in Journal of Materials Research vol. 17 (2002) issue 2. - pp. 479-486
doi:10.1557/JMR.2002.0067 ...

Wöllmer, Silke; Mack, Thomas; Glatzel, Uwe
Influence of tungsten and rhenium concentration on creep properties of a second generation ...
in Materials Science and Engineering: A vol. 319-321 (2001) . - pp. 792-795
doi:10.1016/S0921-5093(01)01063-2 ...

Siebörger, Dieter; Brehm, Holger; Wunderlich, F.; Möller, D.; Glatzel, Uwe
Temperature dependence of lattice parameter, misfit and thermal expansion coefficient of m ...
in Zeitschrift für Metallkunde vol. 92 (2001) . - pp. 58-61

Siebörger, Dieter; Knake, Harald; Glatzel, Uwe
Temperature dependence of the elastic moduli of the nickel-base superalloy CMSX-4 and its ...
in Materials Science and Engineering: A vol. 298 (2001) issue 1-2. - pp. 26-33
doi:10.1016/S0921-5093(00)01318-6 ...

Glock, Karin; Knobloch, Carola; Glatzel, Uwe
Creep properties of Ni₃(AlTiTa) γ′ phase single crystals
in Metallurgical and Materials Transactions A vol. 31 (2000) issue 7. - pp. 1733-1740
doi:10.1007/s11661-998-0330-8 ...

Brehm, Holger; Glatzel, Uwe
Material model describing the orientation dependent creep behavior of single crystals base ...
in International Journal of Plasticity vol. 15 (1999) issue 3. - pp. 285-298
doi:10.1016/S0749-6419(98)00071-0 ...

Siebörger, Dieter; Glatzel, Uwe
Orientation-dependent creep behavior and microstructure of nickel solid solution single cr ...
in Acta Materialia vol. 47 (1999) issue 2. - pp. 397-406
doi:10.1016/S1359-6454(98)00378-4 ...

Link, Thomas; Knobloch, Carola; Glatzel, Uwe
<100> burgers vector in single phase ɣ​’ material verified by image simulation
in Scripta Materialia vol. 40 (1998) issue 1. - pp. 85-90
doi:10.1016/S1359-6462(98)00387-X ...

Völkl, Rainer; Glatzel, Uwe; Feller-Kniepmeier, Monika
Measurement of the lattice misfit in the single crystal nickel based superalloys CMSX-4, S ...
in Acta Materialia vol. 46 (1998) issue 12. - pp. 4395-4404
doi:10.1016/S1359-6454(98)00085-8 ...

Völkl, Rainer; Glatzel, Uwe; Feller-Kniepmeier, Monika
Measurement of the unconstrained misfit in the Nickel-Base Superalloy CMSX-4 with CBED
in Scripta Materialia vol. 38 (1998) issue 6. - pp. 893-900
doi:10.1016/S1359-6462(97)00559-9 ...

Knobloch, Carola; Toloraia, V. N.; Glatzel, Uwe
Anisotropic creep of Ni3(AlTiTa)
in Scripta Materialia vol. 37 (1997) issue 10. - pp. 1491-1498
doi:10.1016/S1359-6462(97)00299-6 ...

Knobloch, Carola; Sass, Volker; Siebörger, Dieter; Glatzel, Uwe
Anisotropie creep behavior of a nickel-based superalloy compared with single phase nickel ...
in Materials Science and Engineering: A vol. 234-236 (1997) . - pp. 237-241
doi:10.1016/S0921-5093(97)00142-1 ...

Sass, Volker; Glatzel, Uwe; Feller-Kniepmeier, Monika
Anisotropic creep properties of the nickel-base superalloy CMSX-4
in Acta Materialia vol. 44 (1996) issue 5. - pp. 1967-1977
doi:10.1016/1359-6454(95)00315-0 ...

Glatzel, Uwe; Peng, Z.; Linker, Torsten; Feller-Kniepmeier, Monika
Change of Phase Morphologies During Creep of CMSX-4 at 1253K
in Scripta Materialia vol. 34 (1996) issue 2. - pp. 221-226
doi:10.1016/1359-6462(95)00510-2 ...

Forbes, Keith R.; Glatzel, Uwe; Dariola, Ram; Nix, William D.
High temperature deformation properties of NiAl single crystals
in Metallurgical and Materials Transactions A vol. 27 (1996) issue 5. - pp. 1229-1240
doi:10.1007/BF02649860 ...

Wanderka, Nelia; Glatzel, Uwe
Chemical composition measurements of a nickel-base superalloy by atom probe field ion micr ...
in Materials Science and Engineering: A vol. 203 (1995) issue 1-2. - pp. 69-74
doi:10.1016/0921-5093(95)09825-9 ...

Wanderka, Nelia; Glatzel, Uwe
Messung der chemischen Zusammensetzung einer einkristallinen Nickelbasissuperlegierung mit ...
in GIT : Labor-Fachzeitschrift vol. 39 (1995) issue 11. - pp. 1059-1062

Völkl, Rainer; Glatzel, Uwe; Feller-Kniepmeier, Monika
Analysis of matrix and interfacial dislocations in the nickel base superalloy CMSX-4 after ...
in Scripta Metallurgica et Materialia vol. 31 (1994) issue 11. - pp. 1481-1486
doi:10.1016/0956-716X(94)90060-4 ...

Glatzel, Uwe; Müller, Andreas
Neutron scattering experiments with a nickel base superalloy part I : Material and experim ...
in Scripta Metallurgica et Materialia vol. 31 (1994) issue 3. - pp. 285-290
doi:10.1016/0956-716X(94)90284-4 ...

Glatzel, Uwe
Neutron scattering experiments with a nickel base superalloy part II : Analysis of intensi ...
in Scripta Metallurgica et Materialia vol. 31 (1994) issue 3. - pp. 291-296
doi:10.1016/0956-716X(94)90285-2 ...

Müller, Lothar; Glatzel, Uwe; Feller-Kniepmeier, Monika
Calculation of the internal stresses and strains in the microstructure of a single crystal ...
in Acta Metallurgica et Materialia vol. 41 (1993) issue 12. - pp. 3401-3411
doi:10.1016/0956-7151(93)90220-M ...

Glatzel, Uwe; Forbes, Keith R.; Nix, William D.
Dislocation energies for an anisotropic cubic crystal: Calculations and observations for N ...
in Philosophical Magazine A vol. 67 (1993) issue 2. - pp. 307-323
doi:10.1080/01418619308207160 ...

Müller, Lothar; Glatzel, Uwe; Feller-Kniepmeier, Monika
Modelling thermal misfit stresses in nickel-base superalloys containing high volume fracti ...
in Acta Metallurgica et Materialia vol. 40 (1992) issue 6. - pp. 1321-1327
doi:10.1016/0956-7151(92)90433-F ...

Glatzel, Uwe; Feller-Kniepmeier, Monika
Microstructure and dislocation configurations in fatigued [001] specimens of the nickel-ba ...
in Scripta Metallurgica et Materialia vol. 25 (1991) issue 8. - pp. 1845-1850
doi:10.1016/0956-716X(91)90315-R ...

Feller-Kniepmeier, Monika; Glatzel, Uwe; Link, Thomas; Scheunemann-Frerker, Gerold; Schmidt, Roland
Entwicklung von Gefüge und Versetzungsstrukturen in der einkristallinen Nickelbasislegieru ...
in Fortschrittsberichte VDI : Reihe 5 (1990) issue 203. - pp. 53-64

Glatzel, Uwe; Feller-Kniepmeier, Monika
Calculations of internal stresses in the γ/γ′ microstructure of a nickel-base superalloy w ...
in Scripta Metallurgica vol. 23 (1989) issue 11. - pp. 1839-1844
doi:10.1016/0036-9748(89)90468-7 ...

Glatzel, Uwe; Lenz, Friedrich
Optimization of electrostatic immersion lenses
in Optik vol. 79 (1988) issue 1. - pp. 15-18
http://www.neu.uni-bayreuth.de/de/Uni_Bayreuth/Fak ...

Article in a journal (not peer-reviewed)

Muniraj, Vedi Kuyil Azhagan; Dwivedi, Pravin Kumari; Tamhane, Parikshit; Szunerits, Sabine; Boukherroub, Rabah; Shelke, Manjusha Vilas
High-Energy Flexible Supercapacitor—Synergistic Effects of Polyhydroquinone and RuO₂·xH₂O ...
in ACS Applied Materials & Interfaces vol. 11 (2019) issue 20. - pp. 18349-18360
doi:10.1021/acsami.9b01712 ...

Glatzel, Uwe; Völkl, Rainer
Metalle
in Jahresmagazin Ingenieurwissenschaften (2009)

Article in a book (peer-reviewed)

Vogler, Jonas; Song, Jieun; Huber, Jakob; Völkl, Rainer; Glatzel, Uwe
Mechanical and Microstructural Properties of Brazed Honeycomb Liner Material Haynes 214
In: Ott, Eric A. ; Andersson, Joel ; Sudbrack, Chantal ; Bi, Zhongnan ; Bockenstedt, Kevin ; Dempster, Ian ; Fahrmann, Michael ; Jablonski, Paul ; Kirka, Michael ; Liu, Xingbo ; Nagahama, Daisuke ; Smith, Tim ; Stockinger, Martin ; Wessman, Andrew (ed.): Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives - Cham: Springer, 2023. - pp. 445-452 . - (The Minerals, Metals & Materials Series)
doi:10.1007/978-3-031-27447-3_28 ...

Manzoni, Anna M.; Glatzel, Uwe
High-Entropy Alloys : Balancing Strength and Ductility at Room Temperature
In: Miyamoto, Goro ; Gao, Michael C. (ed.): Encyclopedia of Materials : Metals and Alloys. Band 2. - Amsterdam: Elsevier, 2022. - pp. 441-453
doi:10.1016/B978-0-12-803581-8.11774-6 ...

Andreykiv, Oleksandr; Hembara, Oksana; Dolinska, Iryna; Sapuzhak, Yaroslav; Yadzhak, Nataliya
Prediction of Residual Service Life of Oil Pipeline Under Non-stationary Oil Flow Taking i ...
In: Bolzon, Gabriella ; Gabetta, Giovanna ; Nykyforchyn, Hryhoriy (ed.): Degradation Assessment and Failure Prevention of Pipeline Systems - Cham: Springer, 2021. - pp. 203-216 . - (Lecture Notes in Civil Engineering; 102)
doi:10.1007/978-3-030-58073-5_16 ...

Schleifer, Felix; Fleck, Michael; Holzinger, Markus; Lin, Yueh-Yu; Glatzel, Uwe
Phase-Field Modeling of γ' and γ'' Precipitate Size Evolution During Heat Treatment of Ni- ...
In: Tin, Sammy ; Hardy, Mark ; Clews, Justin ; Cormier, Jonathan ; Feng, Qiang ; Marcin, John ; O'Brien, Chris ; Suzuki, Akane (ed.): Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys - Cham: Springer International Publishing, 2020. - pp. 500-508
doi:10.1007/978-3-030-51834-9_49 ...

Fleck, Michael; Schleifer, Felix; Holzinger, Markus; Glatzel, Uwe
Improving the numerical solution of the phase-field equation by the systematic integration ...
In: Gleim, Tobias (ed.): 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : Proceedings - Kassel: Kassel University Press, 2019. - pp. 445-449
https://www.upress.uni-kassel.de/katalog/abstract. ...

Krieg, Fabian; Mosbacher, Mike; Fried, Markus; Affeldt, Ernst; Glatzel, Uwe
Creep and Oxidation Behaviour of Coated and Uncoated Thin Walled Single Crystal Samples of ...
Superalloys 2016 : Proceedings of the 13th Intenational Symposium of Superalloys - Hoboken, New Jersey: Wiley, 2016. - pp. 773-779
doi:10.1002/9781119075646.ch83 ...

Glatzel, Uwe; Völkl, Rainer
Metals
In: Bullinger, Hans-Jörg (ed.): Technology Guide : Principles – Applications – Trends - Berlin: Springer, 2009. - pp. 8-13
doi:10.1007/978-3-540-88546-7_2 ...

Glatzel, Uwe
Metalle
In: Bullinger, Hans-Jörg (ed.): Technologieführer : Grundlagen, Anwendungen, Trends - Berlin: Springer, 2007. - pp. 10-15

Article in a book (not peer-reviewed)

Munz, Oliver; Schwitzke, Corina; Welzenbach, Sarah; Fischer, Tim; Ulan kyzy, Sonun; Bauer, Hans-Jörg
Experimentelle Untersuchung von Anstreifvorgängen in Turbomaschinen
Ideen und Innovationen für die Energie von morgen : Wissenschaftliche Beiträge des KIT zu den Jahrestagungen 2014, 2016 und 2017 des KIT-Zentrums Energie - Karlsruhe: KIT Scientific Publishing, 2018. - pp. 101-105
doi:10.5445/IR/1000085344 ...

Munz, Oliver; Schwitzke, Corina; Bauer, Hans-Jörg; Welzenbach, Sarah; Fischer, Tim; Ulan kyzy, Sonun
Modelling the Rubbing Process in Labyrinth Seals
In: Global Power and Propulsion Society (GPPS) (ed.): Proceedings of GPPS Forum 18 - Zug, 2018
https://gpps.global/wp-content/uploads/2021/01/GPP ...

Reissig, Lutz; Glatzel, Uwe
Influence of Mechanical Deep Drilling on the Near-Surface-Microstructure of Ti6Al4V
In: Clyne, T. W. ; Simancik, Frantisek (ed.): Metal matrix composites and metallic foams - Weinheim: Wiley-VCH, 2005. - pp. 202-207 . - (EUROMAT 99; 5)
doi:10.1002/3527606203.ch36 ...

Brehm, Holger; Glatzel, Uwe
Dislocation Density Based Model Incorporated in a Finite Element Code in Order to Describe ...
In: Khan, Akhtar S. (ed.): Plasticity, damage and fracture at macro, micro and nano scales : proceedings - Fulton, Md.: NEAT Press, 2002. - pp. 236-238

Reissig, Lutz; Völkl, Rainer; Glatzel, Uwe
Influence of Mechanical Deep Drilling on the Near Surface Microstructure of Ti6Al4V
In: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, K. D. ; Knake, Harald (ed.): Thüringer Werkstofftag 2002 - Berlin: Köster, 2002. - pp. 153-158 . - (Schriftenreihe Werkstoffwissenschaften; 17)

Gorelik, Tatiana; Kaiser, Ute; Glatzel, Uwe
Morphology and Structure of Ge Nanocrystals after Ion-Implantation into SiC
In: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, K. D. ; Knake, Harald (ed.): Thüringer Werkstofftag 2002 - Berlin: Köster, 2002. - pp. 80-85 . - (Schriftenreihe Werkstoffwissenschaften; 17)

Völkl, Rainer; Glatzel, Uwe; Brömel, T.; Freund, D.; Fischer, Bernd; Lupton, David
Creep of Platinum Alloys at Extremely High Temperatures
In: Parker, J. D. (ed.): Creep and fracture of engineering materials and structures : proceedings - London: Institute of Materials, 2001. - pp. 21-27
https://www.researchgate.net/publication/266414556 ...

Brehm, Holger; Glatzel, Uwe
Modeling the Anisotropic Primary and Secondary Creep Behavior of Single Crystals and Compa ...
In: Mishra, Rajiv S. (ed.): Creep behavior of advanced materials for the 21st century : proceedings of a symposium sponsored by the MPMD and SMD divisions of the Minerals, Metals & Materials Society - Warrendale, Pa.: Minerals, Metals & Materials Society, 1999. - pp. 359-368

Thiel, S.; Glatzel, Uwe; Mack, Thomas
Characterization of Phases in Oxidation Protecting Coatings for Superalloys
4th International Congress on Energy, Environment and Technological Innovation - Rom, 1999. - pp. 645-649

Brehm, Holger; Glatzel, Uwe
First Attempt to Develop a Material Model Describing Single Crystal Creep Behavior
In: Bulatov, Vasily V. (ed.): Multiscale Modelling of Materials - Warrendale, Pa.: Materials Research Soc., 1999. - pp. 547-552 . - (MRS Symposium Proceedings; 538)

Knobloch, Carola; Glock, Karin; Glatzel, Uwe
Observations of Orientation Dependent Creep of Ni3Al
In: George, Easo P. (ed.): High temperature ordered intermetallic alloys VIII - Warrendale, Pa.: Materials Research Soc., 1999. - pp. 1-5 . - (MRS Symposium Proceedings; 552)

Siebörger, Dieter; Glatzel, Uwe
Orientation Dependent Creep Behavior and Dislocation Structure of Nickel Solid Solution Si ...
In: Sakuma, T. (ed.): Creep and fracture of engineering materials and structures : proceedings - Uetikon-Zürich: Trans Tech Publ., 1999. - pp. 253-260
doi:10.4028/www.scientific.net/KEM.171-174.253 ...

Thiel, S.; Wortmann, J.; Glatzel, Uwe
A Superalloy with a Low Density
In: Kern, Heinrich (ed.): Thüringer Werkstofftag : 15. März 1999 ; Vorträge und Poster - Ilmenau: TU, Inst. für Werkstofftechnik, 1999. - pp. 121-126

Völkl, Rainer; Glatzel, Uwe; Feller-Kniepmeier, Monika
ImageCBED++: an Easy to Use Program for Rapid Analysis of CBED HOLZ Line Patterns
Electron Microscopy 1998 : Proceedings. Band 3. Materials Science 2 - Bristol: Institute of Physics Publ., 1998. - pp. 785-786

Sass, Volker; Siebörger, Dieter; Knobloch, Carola; Glatzel, Uwe
Anisotropic Creep Behavior of a Nickel-Based Superalloy Compared with Nickel Solid Solutio ...
In: Earthman, James C. ; Mohamed, Farghalli A. (ed.): Creep and fracture of engineering materials and structures : proceedings - Warrendale, Pa.: Mineral, Metals & Materials Soc., 1997. - pp. 687-696

Siebörger, Dieter; Sass, Volker; Knobloch, Carola; Glatzel, Uwe
Anisotropic Creep Behavior of a Nickel-Based Superalloy in Comparison with Single Phase Ni ...
In: Khan, Akhtar S. (ed.): Physics and mechanics of finite plastic and viscoplastic deformation : proceedings - Fulton, Md.: NEAT Press, 1997. - pp. 87-88

Sass, Volker; Glatzel, Uwe; Feller-Kniepmeier, Monika
Creep Anisotropy in the Monocrystalline Nickel-Base Superalloy CMSX-4
In: Kissinger, R. D. ; Deye, D. J. ; Anton, D. L. ; Cetel, A. D. ; Nathal, M. V. ; Pollock, T. M. ; Woodford, D. A. (ed.): Superalloys 1996 - Warrendale, Pa., 1996. - pp. 283-290

Völkl, Rainer; Glatzel, Uwe; Feller-Kniepmeier, Monika
Analysis of Matrix and Interfacial Dislocations in the Nickel-Based Superalloy CMSX 4 afte ...
The 4th European Conference on Advanced Materials and Processes. Band 2. Symposium D - structural metallic materials, symposium E - surface engineering - Milano: Associazione Italiana di Metallurgia, 1995. - pp. 573-576

Glatzel, Uwe; Müller, Andreas; Reimers, Walter; Feller-Kniepmeier, Monika
Determination of Internal Strains in Single Crystal Nickel-Based Superalloys by Neutron Di ...
The 4th European Conference on Advanced Materials and Processes. Band 2. Symposium D - structural metallic materials, symposium E - surface engineering - Milano: Associazione Italiana di Metallurgia, 1995. - pp. 233-242
http://www.metalle.uni-bayreuth.de/de/download/pub ...

Glatzel, Uwe; Müller, Andreas
Calculated and Measured Internal Strains of Creep Deformed Single Crystal Nickel Based Sup ...
In: Andersen, S. I. (ed.): Numerical predictions of deformation processes and the behavior of real materials - Roskilde: Risø National Laboratory, 1994. - pp. 319-324

Glatzel, Uwe; Müller, Andreas
Internal Strains of a Creep Deformed Single Crystal Nickel-Based Superalloy
In: Neumann, Dan A. ; Russell, T. P. ; Wuensch, B. J. (ed.): Neutron Scattering in Materials Science II - Pittsburgh, 1994. - pp. 397-402 . - (Materials Research Society Symposium Proceedings; 376)
doi:10.1557/PROC-376-397 ...

Forbes, Keith R.; Glatzel, Uwe; Dariola, Ram; Nix, William D.
High Temperature Deformation of Single Crystals of NiAl
In: Baker, Ian ; Dariola, Ram ; Whittenberger, J. D. ; Yoo, M. H. (ed.): High-Temperature Ordered Intermetallic Alloys V - Pittsburgh, 1993. - pp. 45 . - (Materials Research Society Symposium Proceedings; 288)
doi:10.1557/PROC-288-45 ...

Glatzel, Uwe; Forbes, Keith R.; Nix, William D.
TEM Observations of Dislocation Structures in Single Crystals of NiAl after High Temperatu ...
In: Baker, Ian ; Dariola, Ram ; Whittenberger, J. D. ; Yoo, M. H. (ed.): High-Temperature Ordered Intermetallic Alloys V - Pittsburgh, 1993. - pp. 385-390 . - (Materials Research Society Symposium Proceedings; 288)
doi:10.1557/PROC-288-385 ...

Müller, Lothar; Glatzel, Uwe; Feller-Kniepmeier, Monika
Elastic Interaction in Nickel-Based Superalloys Containing High Volume Fraction of γ' Phas ...
In: Boehler, Jean-Paul ; Khan, Akhtar S. (ed.): Anisotropy and Localization of Plastic Deformation - London, 1991. - pp. 512-515

Feller-Kniepmeier, Monika; Glatzel, Uwe; Link, Thomas; Scheunemann-Frerker, Gerold
Influence of Internal and External Stresses on the Microstructure of superalloy SRR99 Duri ...
In: Wilshire, B. ; Evans, R. W.; The Institute of Metals (ed.): Creep and Fracture of Engineering Materials and Structures - UK, 1990. - pp. 323-331

Glatzel, Uwe; Feller-Kniepmeier, Monika
Application of a Finite Element Model to the Microstructure of a Nickel-Based Superalloy w ...
In: Exner, Hans E. ; Schumacher, V. (ed.): Advanced Materials and Processes : Proceedings of the First European Conference on Advanced Materials and Processes - Aachen, 1989. - pp. 475-480

Conference item (peer-reviewed)

Heinz, Peter; Müller, Klaus; Bergmann, Hans W.
Einsatz eines 4kW-Diodenlasers zum temperaturgeregelten Härten
1999
DgaO Jahrestagung, Berlin

Heinz, Peter
Grundlagen des Lasers
1998
Seminar: Laser in der Materialbearbeitung / Veranstalter: Deutsche Gesellschaft für Metallkunde e.V., Universität Bayreuth

Heinz, Peter
Lasersicherheit und rechtliche Grundlagen
1998
Seminar: Laser in der Materialbearbeitung / Veranstalter: Deutsche Gesellschaft für Metallkunde e.V., Universität Bayreuth

Conference item (not peer-reviewed)

Li, Bingtao; Deodeshmukh, Vinay; Schlereth, Clara; Ulrich, Anke Silvia; Galetz, Mathias C.
Metal Dusting Resistance of N06235 Alloy and its Weld Overlay Under High Pressure Conditio ...
2022
AMPP Annual Conference + Expo, San Antonio, Texas, USA

Gabriel, Tobias; Scherm, Florian; Gorywoda, Marek; Glatzel, Uwe
Influence of Laser Power and Scanning Velocity in One- and Two-Step Laser Cladding on Ultr ...
2018
doi:10.1364/CLEO_AT.2018.AM1M.7 ...
Conference on Lasers and Electro-Optics CLEO, Optical Society of America (2018), San Jose, Calif., United States

Hackenschmidt, Reinhard; Wallmann, Clemens
Die Entwicklung einer Mokkatasse : Bericht über Erfahrungen mit der Prozesskette beim Impl ...
2001
http://nbn-resolving.org/urn:nbn:de:bvb:703-epub-2 ...
Internationales Pro/USER Anwendertreffen in Bayreuth (Bayreuther 3D-Konstrukteurstag), Bayreuth

Doctoral thesis

Gottwalt-Baruth, Albin
Mechanisches Ermüdungsverhalten von Elektroblechen
Bayreuth, 2024. - II, 123 pp.
doi:10.15495/EPub_UBT_00007772 ...
(thesis, 2023, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Dickes, Daniel
Oxide layer and diffusion zone formation during oxidation of Ti6Al4V and TiZrNbHfTa and th ...
Bayreuth, EPub Bayreuth, 2024. - IV, 112 pp. doi:10.15495/EPub_UBT_00007407 ...
(thesis, 2023, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Schlereth, Clara
Umgebungseinfluss auf die Oxidschichtbildung in befeuchteter Luft und bei Metal Dusting-Be ...
Bayreuth, 2023. - IX, 121 pp.
doi:10.15495/EPub_UBT_00006961 ...
(thesis, 2023, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Schleifer, Felix
Simulation der Reifung von γ″-Ausscheidungen in der Legierung IN718
Bayreuth, 2021. - II,125 pp.
doi:10.15495/EPub_UBT_00005845 ...
(thesis, 2021, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Ulrich, Anke Silvia
Entwicklung von Ausscheidungshärtbaren Cr-Si-Basis-Legierungen für Hochtemperaturanwendung ...
Düren, Shaker, 2020. - xii, 116 pp. (thesis, 2020, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Reif, Michael
Dreistufiger Oxidationsprozess für Zirkonium zur Verbesserung der Oxidschichthaftung
Aachen, Shaker, 2014. - II, 100 pp. (thesis, 2014, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Hochmuth, Christian
Der Einfluss von Zirkonium auf Mikrostruktur und Kriecheigenschaften von Mo-Si-B-Legierung ...
Aachen, Shaker, 2014(thesis, 2013, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Fuhrmann, Lars
Die innere Oxidation von Ni-Zr-Y als Gussstück und Pulver und deren Anwendung
Aachen, Shaker, 2014. - II, 109 pp. (thesis, 2014, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Daoud, Haneen
Mikrostruktur, mechanische Eigenschaften und Oxidationsverhalten von Legierungen mit kompl ...
Aachen, Shaker, 2014(thesis, 2014, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Fleischmann, Ernst
Einfluss der Mischkristallhärtung der Matrix auf die Kriechbeständigkeit einkristalliner N ...
Aachen, Shaker, 2013. - II, 111 pp. (thesis, 2013, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Albert, Benedikt
Hochtemperaturverhalten von Spritzguss-Nickelbasis-Superlegierungen am Beispiel von Honigw ...
Aachen, Shaker, 2013. - 115 pp. (thesis, 2012, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Konrad, Christian
Die innere Oxidation in Ni-Zr-Y-Legierungen : Erzeugen keramischer Strukturen im Werkstoff ...
Aachen, Shaker, 2013. - II, 115 pp. (thesis, 2012, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Bölitz, Marie-Christin
Korrosion von Molybdän- und Platinelektroden in Kalknatron- und Borosilicatglas
Aachen, Shaker, 2013. - II, 106 pp. (thesis, 2013, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Bensch, Matthias
Einfluss der Wandstärke auf das Kriechverhalten einkristalliner Nickelbasis-Superlegierung ...
Aachen, Shaker, 2012(thesis, 2012, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Brunner, Martin
Kriechverhalten und Herstellung im Feinguss von dünnwandigen Nickelbasis-Superlegierungen
Aachen, Shaker, 2012. - II, 95 pp. (thesis, 2012, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Nikulina, Elizaveta
Bestimmung der Fehlpassungen und Untersuchungen von Kristallfehlern in Platin- und Nickel- ...
Aachen, Shaker, 2011. - II, 72 pp. (thesis, 2010, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Scherm, Florian
Charakterisierung von Metall-Keramik-Verbundwerkstoffen mit isolierten und interpenetriere ...
Aachen, Shaker, 2010. - II, 111 pp. (thesis, 2010, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Günthner, Martin
Herstellung, Umwandlungsverhalten und Eigenschaften keramischer Polysilazanschichten auf S ...
Göttingen, Cuvillier, 2010. - 136 pp. (thesis, 2010, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Liebscher, Christian H.
Hochaufgelöste transmissionselektronenmikroskopische Phasen- und Versetzungsanalyse in Nic ...
Aachen, Shaker, 2010. - II, 120 pp. (thesis, 2010, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Hüttner, Rainer
Kriechverhalten von dünnwandigen, einkristallinen Nickelbasis-Superlegierungen und von Mol ...
Aachen, Shaker, 2010. - VII, 95 pp. (thesis, 2009, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Guimaraens, Elisa
Metallurgische Charakterisierung von laserschweißgelöteten Aluminium-Stahl-Mischverbindung ...
Aachen, Shaker, 2010. - II, 107 pp. (thesis, 2010, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Galetz, Mathias
Influence of temperature on friction and deformation mechanisms in artificial knee joints
Aachen, Shaker, 2009. - II, 101 pp. (thesis, 2009, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Preußner, Johannes
Thermodynamische Modellierung des Legierungssystems Pt-Al-Cr-Ni
Aachen, Shaker, 2009. - IV, 85 pp. (thesis, 2009, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Kunst, Martin
Einfluss der Legierungszusammensetzung auf Gefüge und Kriechverhalten der Magnesiumlegieru ...
Berlin, Köster, 2008(thesis, 2008, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Laukant, Holger
Laserschweiß-Löten von Stahl-Aluminium-Mischverbindungen : Mechanisch-technologisches Eige ...
Berlin, Köster, 2007. - VII, 123 pp. (thesis, 2007, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Wenderoth, Markus
Ausscheidungsverfestigte Platinlegierungen für Hochtemperaturanwendungen : Potentielle Leg ...
Berlin, Köster, 2006. - VI, 112 pp. (thesis, 2006, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Musiol, Johanna
Einsatz zellularer metallischer Strukturen im motornahen Abgasstrang zur Reduktion der Koh ...
München, Utz, 2006. - IV, 116 pp. (thesis, 2006, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Vorberg, Stefan
Entwicklung von Platinbasis-Superlegierungen : Untersuchungen im Mikro- und Nanometerberei ...
Berlin, Köster, 2006. - VIII, 116 pp. (thesis, 2006, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Rudnik, Yegor
Modellierung des anisotropen Kriechverhaltens von Nickelbasis-Superlegierungen und Untersu ...
Berlin, Köster, 2006. - 121 pp. (thesis, 2006, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Hasnik, Michal
Comparative corrosion investigation on different cylinder liners concepts for aluminium en ...
2005. - 123 pp.
(thesis, 2006, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Mayer, Stefan
Werkstoffkundliche Untersuchungen zur Eignung hochfester Stähle zum Laserstrahlschweißen
München, Utz, 2005. - XI, 216 pp. (thesis, 2004, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Wallmann, Clemens
Herstellung und Eigenschaften von laserbeschichteten Diamanttrennschleifscheiben
München, Utz, 2004. - XIV, 160 pp. (thesis, 2003, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Reitlinger, Claus E.
Entwicklung alternativer bleifreier Lote für die Mikroverbindungstechnik
München, Utz Wiss., 2001. - XI, 139 pp. (thesis, 2000, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Hilbinger, Rolf M.
Heißrissbildung beim Schweißen von Aluminium in Blechrandlage
München, Utz Wiss., 2001. - 192, XIV pp. (thesis, 2000, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Waldmann, Hans
Werkstofftechnische Aspekte des Laserstrahlschweißens von Aluminiumlegierungen für den Fah ...
München, Utz Wiss., 2001. - III, 186 pp. (thesis, 2001, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Burzer, Jörg
Beitrag zur Einsetzbarkeit von Metallschäumen in der Verkehrstechnik
München, Utz Wiss., 2000. - IV, 178 pp. (thesis, 2000, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Dittes, Marc
Elektronikweichlote für spritzgegossene Schaltungsträger
München, Utz Wiss., 1999. - III, 134 pp. (thesis, 1999, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Müller, Klaus
Werkstoffkundliche Qualifizierung des Randschichthärtens mit Laserstrahlung
München, Utz Wiss., 1999. - XIV, 216 pp. (thesis, 1999, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Patent

Lalire, Fanny; Pommier, Stéphane; Diologent, Frédéric; Trosch, Tanja; Glatzel, Uwe; Völkl, Rainer
Platinum Based Alloy, Use Thereof
EP17186552.0 - 1392 (2017)

Göhler, Thomas; Affeldt, Ernst; Rettig, Ralf; Singer, Robert; Neumeier, Steffen; Göken, Mathias; Fleischmann, Ernst; Glatzel, Uwe; Völkl, Rainer
Nickel-Based Alloy with Optimized Matrix Properties
US20150284824A1 (2015)

Göhler, Thomas; Affeldt, Ernst; Rettig, Ralf; Singer, Robert; Neumeier, Steffen; Göken, Mathias; Fleischmann, Ernst; Glatzel, Uwe; Völkl, Rainer
Nickelbasislegierung mit optimierten Matrixeigenschaften
EP2927336A1 (2014)

Konrad, Christian; Völkl, Rainer; Glatzel, Uwe
Herstellung metallbeschichteter Werkstoffe
DE 10 2012 022 846.5 (2012)

Konrad, Christian; Völkl, Rainer; Glatzel, Uwe
Anodenmaterial für Brennstoffzellen : Herstellung eines funktionalen Verbundwerkstoffs, Ce ...
DE 10 2011 107 827.8 (2011)

Konrad, Christian; Völkl, Rainer; Glatzel, Uwe
Verfahren zur Herstellung einer porösen Keramik
DE102011107827A1 (2011)

Konrad, Christian; Völkl, Rainer; Glatzel, Uwe
Verfahren zur Herstellung eines Metallmatrix-Verbundwerkstoffs
DE102011116604.5 (2011)

Glatzel, Uwe; Mack, Thomas; Wortmann, Jürgen; Wöllmer, Silke
Nickel Based Alloy for Casting Single Crystal Components
EP1223229A1 (2001)

Glatzel, Uwe; Mack, Thomas; Wortmann, Jürgen; Wöllmer, Silke
Nickel-Based Alloy for Producing Components Solidified in Single Crystal Form
US20020182100A1 (2001)

Glatzel, Uwe; Mack, Thomas; Wortmann, Jürgen; Wöllmer, Silke
Nickel-Based Alloy for Producing Structural Member Solidified as Single Crystal by Casting ...
JP2002302724 (2001)

Glatzel, Uwe; Mack, Thomas; Wortmann, Jürgen; Wöllmer, Silke
Nickel-Based Alloy for Producing, by Casting, Components Which Have Solidified in Single C ...
CA2366997 (2001)

Glatzel, Uwe; Mack, Thomas; Wortmann, Jürgen; Wöllmer, Silke
Nickel-Basislegierung für die gießtechnische Herstellung einkristallin erstarrter Bauteile ...
DE10100790C2 (2001)